Subscribe to download
M10 Wolverine

This is my 1:1 recreation of the iconic M10.

This vehicle was made to be operated with a crew of 5.

Max speed:
at gear 3 = 20mph (combat speed)
at gear 5 = 27mph (road speed)

It uses a manually loaded Heavy AC as its main gun and a roof-mounted 50 cal for other purposes. All ammo bins are set to AP, change them yourself as you see fit.

As a driver , you have to turn on the fuel pump button (also connected to other pumps) and then the Engine button on your right to turn on the engine. The onboard heaters can and WILL heat the engine up. WATCH YOUR TEMPERATURE GAUGE There is no neutral gear, just 1 reverse and 5 forward. READ the labels next to your driver's panel.

As a gunner , before attempting to rotate the turret, make sure the Turret Travel Lock handle located at the back of the turret is disengaged.

As a commander , you have an onboard periscope to aid your perception without exposing yourself too much. It faces in front of the turret, with some degree of movement. Use the touchscreen to move it. If it's too dark to use it, use your binoculars. There's a reason why US TDs are open-top designs.

The onboard radio can support two channels. To input a frequency , write the desired frequency onto the small keypad, then turn on the Program switch. Once the display blinks, you have to select one of the channels you want to overwrite by pressing the corresponding Push To Talk. Then you have to exit the programmable mode by turning the Program switch off. The radio will prioritize the longer range(CH1) signal over the close range(CH2) one. (AKA. If traffic will be coming from both frequencies at the same time, only CH1 will be heard) The 7-segment display will show you which channel the incoming audio comes from, as well if the CH2 is suppressed by CH1 by a small blinking segment. READ the label next to the radio.