Subscribe to download
IKARUS 280 (Truck Transporter)

Hi There!

Its my replica of IKARUS 280 truck transporter

The Ikarus 280 is a model of the Ikarus 200 series. It is made of two rigid sections linked by a pivoting joint. The body is a semi-self-supporting body with a frame, the Raba-MAN D2156 inline-6 diesel engine is mounted in the front section.[a] It powers the middle axle, meaning that the bus has puller configuration. All three axles are air-sprung beam axles with additional telescopic shock absorbers. Both rear and middle axles were made by Rába, while the front axle was made by LiAZ. Either an automatic or a manual gearbox was installed that allowed a top speed of 65 to 90 kilometres per hour (40 to 56 mph). The manual gearboxes came in either five- or six-speed configuration, and were mated with a dry single-disc clutch. The Ikarus 280 has a pneumatic braking system, a spring loaded parking brake, and an exhaust brake. The steering is hydraulically assisted. The buses, in actual applications, have a minimum of 26 seats, and space for up to 134 additional standing passengers.

Based on Irl modifications used for truck transportations

- 1+12 Seats
- Strong engine
- Easy maintenance
- Cargo platform
I hope you will like it!

Specifications

Top speed - 120 kmph
Fuel capacity - 350L
Engine - V10
Gearbox - ZE CTV (By Uranwind)
Range ~ More than you need

Controls

• W/S - Throttle/Brakes (hold S to engage reverse)
  
• A/D - Steering
  
• Up/Down - Hitch lift
  
• 1 - Ignition, 2 - Light mode, 3 - Low gear, 4 - Hazard lights, 5 - Horn, 6 - Doors close/open
  
• Space - Handbrake

Special thanks to:
101 - Decorations
Bus logic - UranWind