Subscribe to download
Default Van 2 + alarm

Default van, now equipped with car alarm system.
Use the keypad to enter the password to unlock otherwise the alarm will be triggered if push the vehicle or touch the handles. Closed doors won't open if locked, ignition is blocked too.

P/R/N/D gear selector, AWD with a higher front wheel ratio to keep traction. To choose the gear, you heed to press and hold brakes (S button by default), or it won't react.

Use 1 + steering to activate the turn signals, steer opposite to disable. Use 1+5 to activate hazard lights.
Cruise control based on holding the throttle value.

6-cylinder engine equipped with cooling radiator to keep the temperature in safe boundaries.

Tow hitch for hauling some loads, such as a trailer or your favorite caravan. It's not adapted to use the trailers other than my own, so if you need to adapt something, it sends some data through the composite nodes to the trailer to receive. The trailer reads channel 45 as variable brakes, 44 as indicator on/off (for lights), 17-18 for RGB taillights turn signals (17 L, 18 R) and 1 2 3 for RGB taillights red color. 17-18 channels for boolean on/off, which tells to enable the yellow light for RGB (turn signals), you need to setup the yellow light manually and connect the composite switchbox to these channels, off state is connected to the hitch directly and receives the red colors.

The doors (except the trunk and hood) requires to operate manually with using the handles installed, the button to unlock the connector only.

Equipped with electric anchor under hood to charge something or being charged if repaired after battery damage.

Set your desired password in properties, click on the large microcontroller in the roof (next to the trunk pivot), default password is 1234

Some controllers made by other users, such as
Ackermann steering: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1964574894
ZE engine controller: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2416132817