Subscribe to download
Star Trek Voyager Delta Flyer 1:1 w/interiors

The Delta Flyer as seen on Star Trak Voyager. This is my best attempt at a 1:1 scale version coming in at 21m long. This craft has a highly detailed full interior and multiple features. My aim was to get as much detail inside and out along with as many functional features as possible. I had to compromise on some areas to make it all work. However this is SE so you're not going to get 100% perfection.

Features include

-Retractable Warp Nacelles
-Working Rear Hatch
-Working Replicator
-Retractable Landing Gear
-Custom Paint
-Working Tractor Beam
-Medical Scanning Bed
-Strobe & Navigation Lights

Take care when flying as it can come apart (this is Alpha after all) at high speed or in heavy sharp turns. Includes my version of the Multispatial Probe from ep 3 of season 5 "Extreme Risk".

User Manual (updates to come)

There is one main cockpit at the front. All other stations are seats. The main cockpit has some programming with more to be added later and some fine tune adjusting is still required.

-Screen capture was taken with "F8" so you may spawn inside and first need to press "F6".
-Be sure to take ownership of everything first.

-Main Cockpit hotkeys
-Warp Engage (works best with dampers off)
-Tractor beam on
-Tractor beam off
-Landing Gear (reverse)
-Landing Gear Lock
-Nacelles on/off
-Gyros
-Main Deflector on/off (protective gravity field around the ship)
-Rear Hatch Spotlights on/off
-Rear Hatch (reverse)

-Access to the ship is via a button panel at the aft portside. (It is recessed and hidden along with a control panel)
-Button one opens/closes the hatch.
-Button two turns on/off rear access spot lights
-Two buttons inside (portside of hatch) also function the same; bottom button open/close hatch, top button on/off lights.

-Medical Station Scanner/bed
-Foward starboard of the rear compartment (left side of the bed) there is a button on top of a control pedestal. This is for the light over the bed.
-The button on the face of the piston to the right operates the scanner. The scanner will disable these lights when scanning. They will come on after a scan regardless of there on/off prior. (The idea is should you have them on first; they'll turn off during a scan, and come on after. This just allows you to view the scanner better as it's working)

-Replicator
-The connector in the cockpit area (opposite the aft science station) is off.
-Access the connector to select what you want and place it in the connector.
-Now press the yellow button next to the blue sensor above.
-Should be a momentary bluish glow as the object appears.
-Now just take your item.
-Warning I have only tested this with a small item like the hand welder. I don't know how this may work on other items.

-Multispatial Probe (Runaway Probe Mrk IV)
-The new multispatial probe is set up.
-Depending on your own adjustments, should you choose to change them, this probe is capable of creating a cat-&-mouse mini game.
-It is currently set up to runaway from everything.
-Warning the probe is fitted with a self destruct. It's currently set to count down everytime you are within range of it's sensors. Currently set to a generous 10 minutes.
-Use the ships Tractor Beam to capture it and disable the warhead!

Attention Modders-

My hope is in the future someone will make a Jump Drive Mod that works with a beacon. Similar to the current teleport mods, but with the ability to be connected to the ship and teleport it as a whole to a new location. It will also have to capable of turning on and off. This way I can tie it to the existing timers I am using to simulate the effect leading up to warping in and out. As the Warp Nacelles will extend and glow prior and post the jump via one button.

Thanks for the support and please feel free to rate and comment.