Subscribe to download
Analog Stuff | 2018 | Reuploaded

Reupload of the 2018 mod, as is.

Original description:
=====

Ion Thruster:
It's an Ion Thruster! Almost like a real one!
Its thrust depends on the amount of power provided, but unlike a real ion thruster, its maximum thrust is 25 kN.

Distance Sensor:
Outputs a signal from 0 to 1, based on the distance. Max distance can be changed by painting the block with specific color:
First three rows of colors: 1, 2 ... 30 blocks
Last row: 2, 4 ,8 ... 512, 1024 blocks


Gyroscope:
Outputs a power signal from -1 to 1. -1 - pointing up, 1 - pointing down.
Also outputs a logic signal when the angle is bigger than 1°.

Speedometer:
Outputs a power signal from 0 to 1. 0 - standing still, 1 - moving at maximum speed or faster.
Maximum speed can be changed by painting the block.
First row: 1 - 10 blocks/second
Second row: 10 - 100 blocks/second
Third row: 100 - 1000 blocks/second

Altimeter:
Outputs a power signal based on absolute altitude. 0 - roughly 105 blocks underground, 1 - at the "ceiling".
You can calculate power level from Z coordinate using this formula: (Z+100)/1000


Analog Controller:
Can control both bearings and pistons. Bearings and pistons controlled with this thing are faster and stronger.
Power -1 = -180 degrees
Power 0 = 0 degrees / 0 blocks
Power 1 = 180 degrees / 15 blocks

Generator:
Outputs a power signal based on the angular speed of the connected bearing.

Angle Sensor:
Outputs the angle of the connected bearing as a value between -1 and 1.


Steering Conventer:
Unlike A/D converters its output power is based on the position of the steering wheel, so if you mash a button you won't get a series of pulses, but a signal representing the actual position of the steering wheel.


Power Divider:
First row: 100-10%
Last three rows: 1, 1/2 ,1/3 ... 1/29, 1/30
So painting it pink will result in 20% of the input power on the output.

Power Amplifier:
First row: 110-200%
Last three rows: x1, x2 ,x3 ... x29, x30

Inductor:
Smoothes power changes. Number - the denominator of the unit fraction of maximum change of power per tick.
So 40 = 1/40 = 0.025, therefore change from 0 to 1 will take 1/0.025 = 40 ticks (1 second).
First three rows: 4, 8 ... 120 ticks
Last row: 2, 4, 8 ... 512, 1024 ticks

Power Rectifier:
Outputs the absolute value of the input.


Power Memorizer:
Memorizes the input power level when receives a signal from a white logic element.
Has 2 modes: in the first mode forgets its state when placed on a lift, in the second mode memorizes it even when saved in a blueprint.

Switch:
Passes through a power signal when recieves a signal from a white element.

Power Comparator:
Outputs a logic signal when the power signal from the white input is greater than the power signal from the other input.


Powermeter:
Old school powermeter with a needle. Can display both positive and negative power.

This mod is kind of an add-on for "X's Scripted Objects & Remote Logic Mod"