Suscríbete para descargar
4 Platform Metro (= pattern)

does not work for me, even with the newest MTSE

After hours of testing, I can confirm that this is NOT broken for me since Sunset Harbour. Posting this in case people try to troubleshoot.

just wanted to report an issue with this as well as the cross pattern:
a) if you have a line of 3 or more stations you can not add stops on the return path, e.g.

x1---x2---x3

you can make a line from x1 to x2 to x3 but on the rutrn path you can not add x2 as a stop you have to complete the whole line from x3 to x1 and skip x2.

the vanillar stations allow for such a behaviour.

b) if you make a loop you can only add a line in one direction, i.e.

x1---x2
l l
l l
x4--x3

if you connect x1 to x2 to x3 to x4 you can not create a backwards line from x4 to x3 to x2 to x1

again this behaviour works with the vanilla stations


i use spawn point fix to use multiple trains in one station

Works great with the Multi-Track Station Enabler 1.1.0

Got it subscribed and working without traffic++, no need to change anything.
Works great. Thanx :-)

@CZ_bpk: Either will work (they have the same code inside contributed by SimsFirehouse/MTSE). You should only use one or the other though otherwise there will be problems.

MTSE was the original and the required code was then subsequently added to Traffic++.

I could remove Traffic++ from the 'required items' list as it is strictly only optional rather than required. Would that help?

Description says "Use Traffic++ or Multi-Track Station Enabler" but you are only able to subscribe with Traffic++ installed not if you only use Multi- Track Enabler??

Very effective. Nice to have the subway tracks crossing one another - saves a lot of hassle

https://steamhost.cn/steamcommunity_com/workshop/filedetails/discussion/442957897/613958868352039116/

For SimFirehouse's (MTSE) tutorial all about manipulating the paths.

Tks :)