Subscribe to download
[Conecpt] CodeLock

SamHDev's Code Door lock V1.1

To stop the bit crash press the red button.

A Compact Design for a Door Lock using a 10key input pad.
(Its compact for the wireing Involed. Your welcome to take it apart!)

The keypad is ment to be like:

1 2 3
4 5 6
7 8 9
0

The red key is to clear/reset/turn off
The green is enter.
It can only support a 5 digit code.

The current code is
12345

To configure
1. Look at the back
2. Unconnect from the Pins(Logicblocks below LBlue - DPurple) all they Dark gray Logicblocks that are connected to the
Pins(Logic Blocks Below LBlue-DPurple)
3. Take the Key That is desired for the first digit and wire that to the first logic block below(LBlue-DPurple)
4.Reapet to Pins(LogicBlocks Below) Filled
5. Try out your code

To adjust the time:
Use the Blue Switch located on the side to open the timers. The green timer is for the open-time and the red for the closed time.

To take an output:
Use the two Green and red logic blocks on the rear to get an output. Green is for Correct Pin and the Red is for Incorrect Pin.