Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.1.2 --- a working bell with sound for standard-triggering (use) or also by adding pippi?s Tcontrol, a new window iron universal-crate

Version 1.1.3 ---two new flatter floorground-pieces:quad/triangle (without it?s beams), two multi-position pillar (256/512 high) for wall and room-decorations and a lower arch suiting to lower ceilings

Version 1.1.4 ---New: a tall rect. window 2HE with crate and glass and shutter-option as well, texture-overhauling for the dark wood to become more "brown" to become suiting better and closer with the original-kit, the floorground-texture now is darker, brown and lost it?s yellow timbre, the rusty metal texture now should look more natural

Version 1.1.5 ---(Version 1.1.4 did not seem to work for an updating)
Version 1.1.6 ---New Ceiling Beams with and without Wall-Support suiting to the existing Wooden-Poles (lot of placing-possibilities!!!!)
Version 1.1.7--->rusty texture-overhauled, roof-texture overhauled (will be soon more better), Iron portculis for the slide-door, wall arch rectangulated, sloped-roof-cap to offer the full pack-tiled-parts to serve roofs, stone pillar with more functions, 128-stone-pillar (same functions, special pillar 128 with again same functions, half-long-wall with incredible options! and a wall at 1/4 of heights (64er-wall)-tested and checked out in devkit-> have fun with this new options!
Version 1.1.8 (copy of 1.1.7...update didn?t seemed to work yet)
Version 1.2.0 is a patch for the game-update: 10th, 17, 2024

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.1.2 --- a working bell with sound for standard-triggering (use) or also by adding pippi?s Tcontrol, a new window iron universal-crate

Version 1.1.3 ---two new flatter floorground-pieces:quad/triangle (without it?s beams), two multi-position pillar (256/512 high) for wall and room-decorations and a lower arch suiting to lower ceilings

Version 1.1.4 ---New: a tall rect. window 2HE with crate and glass and shutter-option as well, texture-overhauling for the dark wood to become more "brown" to become suiting better and closer with the original-kit, the floorground-texture now is darker, brown and lost it?s yellow timbre, the rusty metal texture now should look more natural

Version 1.1.5 ---(Version 1.1.4 did not seem to work for an updating)
Version 1.1.6 ---New Ceiling Beams with and without Wall-Support suiting to the existing Wooden-Poles (lot of placing-possibilities!!!!)
Version 1.1.7--->rusty texture-overhauled, roof-texture overhauled (will be soon more better), Iron portculis for the slide-door, wall arch rectangulated, sloped-roof-cap to offer the full pack-tiled-parts to serve roofs, stone pillar with more functions, 128-stone-pillar (same functions, special pillar 128 with again same functions, half-long-wall with incredible options! and a wall at 1/4 of heights (64er-wall)-tested and checked out in devkit-> have fun with this new options!

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.1.2 --- a working bell with sound for standard-triggering (use) or also by adding pippi?s Tcontrol, a new window iron universal-crate

Version 1.1.3 ---two new flatter floorground-pieces:quad/triangle (without it?s beams), two multi-position pillar (256/512 high) for wall and room-decorations and a lower arch suiting to lower ceilings

Version 1.1.4 ---New: a tall rect. window 2HE with crate and glass and shutter-option as well, texture-overhauling for the dark wood to become more "brown" to become suiting better and closer with the original-kit, the floorground-texture now is darker, brown and lost it?s yellow timbre, the rusty metal texture now should look more natural

Version 1.1.5 ---(Version 1.1.4 did not seem to work for an updating)
Version 1.1.6 ---New Ceiling Beams with and without Wall-Support suiting to the existing Wooden-Poles (lot of placing-possibilities!!!!)

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.1.2 --- a working bell with sound for standard-triggering (use) or also by adding pippi?s Tcontrol, a new window iron universal-crate

Version 1.1.3 ---two new flatter floorground-pieces:quad/triangle (without it?s beams), two multi-position pillar (256/512 high) for wall and room-decorations and a lower arch suiting to lower ceilings

Version 1.1.4 ---New: a tall rect. window 2HE with crate and glass and shutter-option as well, texture-overhauling for the dark wood to become more "brown" to become suiting better and closer with the original-kit, the floorground-texture now is darker, brown and lost it?s yellow timbre, the rusty metal texture now should look more natural

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.1.2 --- a working bell with sound for standard-triggering (use) or also by adding pippi?s Tcontrol, a new window iron universal-crate

Version 1.1.3 ---two new flatter floorground-pieces:quad/triangle (without it?s beams), two multi-position pillar (256/512 high) for wall and room-decorations and a lower arch suiting to lower ceilings

(ideas for the next version: some triangle for the roof-middle-gap, a working trap door (as promissed) and some new ways to leave the standard build creation-grid for more realistic and individual building-placements, which I will show you soon!)

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.1.2 --- a working bell with sound for standard-triggering (use) or also by adding pippi?s Tcontrol, a new window iron universal-crate

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.1.1---New roof beam-systems for 4+5 step roofs, a full building-part: Spindlestair - Tower Corner 2H !! -> wanted to be placed at LAST part ! (for collision-reasons), a new small portcullis as a 2nd slide-door for the slide-door-frame!

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wall-bay-system for any wanted heights-size and for using together with roof- or wall-crown on top, 256 and 512-(one or two windows) stepping, can be used also limitless

Version 1.0-----offers 38 new build-parts for a perfect match with the original kit
Version 1.0.1---correction of the heights-sockets of the 2HE-windows
Version 1.0.2---more precise shutter handling and hopefully now also supportable with PIPPI?s "Tcontrol", optimizing the gate?s height and it?s texture (heights-lowering), and some few mesh-smoothing-corrections, new: 2 Large Windows added with two variants of glass-inlays,
new: alternative designed top-wall-parts (4 pieces), which are supporting the half-round wall

Version 1.0.4---correct working window-shutters (without this ugly turn-moves if ticked a first time),....new: gatehouse with portcullis and optional gate-slot on the other side, a new window in romanic-style, a correction of the tower-crown-cycle s texture (is now suiting better to the originals) and new: a slidedoor-frame with a suiting door for "half-secret-entrance-use"

Version 1.0.5---New parts for more higher walls, curtain-walls, one straight-piece, one curved in 1-step-180degrees and aone corner-gap-piece for both directions working (a suiting crenelation-part for those pieces is following later)

Version 1.0.6---A bunch of new windows (7 pieces, from huge to small) and different roof-beams and an alternative new ceiling-system (floor/ceiling-parts)

Version 1.0.7---new doors (doubledoors) / plus frames and new windows, Half-Wall and an 1step-arch-combination
Version 1.0.8---(corrects one of the new double-doors)
Version 1.0.9---stairs made of wood (256+128) and stone (128) , a "multiple-location-pillar" and an iron wall-anchor
Version 1.1.0---new: fence-system (pole+128 and 256-fence) for inside use (suiting to the stairs), a fully wal-bay-system for any wanted heights-size and for roof- or for wall-crown, 256 and 512-stepping