Can i buy the body parts in the shop? i have a camaro that needs body work done but i cant buy it and i cant fix the old ones. and its missing some body parts as well so how would i go about replacing them?

so something i noticed while rebuilding ingame there is no drive axle that connects to the rear wheels, all 4 are capped off. and the rear sway bar doesnt line up with its connectors and it can be removed without them. also the gas tank clips through the bottom of the car though i do not know if that is intentional or not.

can you make the 2000 hatchback ford focus?

I have started but never finished the 4th gen Cat fish, really wanted to do the 93-97 Before the Catfish but its like a $100 model

Can you do the catfish 4th gen? Those are really unique

The role cage and tinting are all tuning options that Chevrolet never offered just there build purposes

Gotcha. Modeled after the 90 not the 82 to 89 model. Didn't see the door set I will have to look into it. I didn't think the Camaro came with a roll cage option from factory. I seen the clipping when I tried to edit it the rear to make it authentic.

1. the Fenders are going to stay the way they are 2. The Rear Windows are for a role cage option and Tinted windows, 3. Its a 1990 Model year ground effects wheren't optional it was on every trim model rs, z28 etc. 4. The Iroc Z isnt on every door damnit you have to play with the customization to not have it on the door 5. As again its a 1990 they had electric cooling Fans 6. the leaf spring suspension clipped to much so i said fuck it. i did make another version of this available with some other option, the 82 front camaro i think looks ugly as all hell and wont be doing it.

Good mod but I have a few complaints. 1.The fenders are not removable in this mod. 2.There are so many different types of back hatch windshields you have on here that were not made for this vehicle unless it was done by a aftermarket fabricator. 3.Ground effects were optional. 4. IROC Z was not on every models door. 5. The radiator should have been the Wide version without electric fan. And finally 6. These cars came with leaf spring suspension. I have owned 3 different year models of this car personally and I would love to see it done justice and maybe add in some original rims.

Rims were like this: https://www.thirdgen.org/forums/attachments/history-originality/428827d1501501098-1987-z28-question-dsc04155.jpg

Version without Ground effects was like this: https://www.thirdgen.org/forums/attachments/auto-detailing-appearance/17031d1029042950-pics-without-ground-effects-berlinetta.jpg

If you fixed these this mod would be perfect hands down.

Steering rack and part of the front suspension crossmember goes through the engine.
Front exhaust part is disconnected with the rest of the exhaust system.
Not a good mod mechanically. =(

5th gen camaro pls?

Dunno why that is never had an issue with that

ok after playing i found the front end piece , you were correct DodgeCharger. I still am having problems getting the sit prompt to come up without taking out windshield. but not a big deal. With the windshield out, and door open i can point to either driver or passenger seat and the sit prompt comes up. otherwise i open the door any nothing when pointing at seats. I tried all over ,seats dash, steering wheel, whole interior, even rocker panel as mentioned earlier but still nothing. hope this helps anyone else, its def not a deal breaker at all. nice looking car

i think i found the issue with sitting in car, it was more sensitive and after opening the door you had to place you cursor directly on the edge of the rocker panel, or bottom inside of door. ill check again on front end next time. i ended up just scrapping the whole car for parts, and then unsubscribed and actually got more money that way. lol but ill re subscribe and try your advice thanks

You would have to well open the door to sit inside, look at the parts image in the store and that may help, i think front end is the camaro emblem on the front bumper with some lines down the side

i had the same problem with not being able to sit unless i took front windshield out, also sometimes it would tell me that a part was accessable from engine bay and i was already in engine bay. had to back out and go back in. did this a few times. Also even after i stripped the whole car apart , couldnt figure out where 'front end C' went. I assume near front bumper but couldnt get anything to pop up in the install mode ( I think its called mount or remount), im fairly new to the game so not 100% on all the part placement

střední tlumiče výfuku nejsou napojený na výfukové potrubí z motoru, výfukové potrubí zasahuje do předního příčnýho nosníku, hřebenová tyč řízení prochází olejovou vanou, přední příčný stabilizátor prochází olejovou vanou, kulový čep řízení zasahuje do předních disků, vnější řídící tyč zasahuje do předních disků, přední příčný nosník zasahuje do olejový vany, chybí zadní náprava z kol

cant wait for toast

Sit down the Car, like off the lifter?

For some reason I cannot sit down in the car

Np problem, got some other things in the works regarding Toast so its all Good

mk, thanks for clarifying mah dud

The ability to make Toast will be a seperate mod entirely because i cant edit this mods Model files anymore as i dont have the original files and shit for it

just realised someone already commented about that.... sry

so..... we gonna get an update on this with Toast anytime soon?

How do I buy the body parts for it?

you can use a different engine and make toast

please give it a blower so we can create toast

Could you make a 1977 camaro Z28?

are or will you do a 68-71 camaro, also these are some cool IROCs.

No, it's not ub mapped and I don't do liveries

can you make liveries or sticker of the 1982 camaro indianapolis model please

i have tuning DLC free so i like it where is it on one of the icons?

the stock version (not sure on others) has no drive axles in the rear (wrong outer parts used).

yea everything is all good now got some things back, this car i sadly dont and i had a plan on updating it with some new tuning parts...

That makes sense. Sorry to hear about your drive :(

the problem is more or less me no having the model anymore because my hd died and the way this model in particular was is a complete mess and uv map may not look better than it does now

Ah well. Was a fun build but that breaks it for me. Appreciate your time making this mod but once is enough for me.

"Most cars?" Ive seen a lot of good models out there that dont have this issue.

how did you get the map to work? i cant make mine work at all

thank you so very much

what to do about the tires

To bad, most cars are like that that’s that, it’s not getting re mapped for that

Rust textures are messed up.

Wow, I own a '85 IROC and I'm really glad I can create it in the game now too :)
Thanks!

Only the driveshaft

I am confused are you saying you can not fix all the problems accept the drive shaft or you can fix all the problems accept the drive shaft?

All of those problems can not and will be fixed except the driveshaft

obdserved issues with mod: body texture many repeats leaving rust to have a distinct unnatural repeat pattern. drive shaft does not align with the
rear suspension. rear sway bar does not line up with rear sway
bar link. rear suspension arm clips with tires.

I was getting concerned for a bit there