The metro tracks are not levelled differently, so it's not possible to lay down the tracks. Shame!

@Chilvalric pretty sure this is another metro hub from before the sunset harbour update. They broke all the lovely metro assets by making the ingame metro and metro tracks longer. Which is a crying shame because lots of fan made metro hubs instantly became unusable.

I also have the problem that nobody uses these stations. The reason could be that I haven't yet connected the rail network?

For those who love this asset but don't know how to connect the rails, here is how I made it:
Two lane two way rail, -18m, and then hover your mouse around the visible segments end as you can see through the beautiful glass top. When there is no nod detected, the '-18m' label will travel with your cursor; but if your cursor is like adsorbed to some node and the '-18m' label disappeared at the same time, then you made it. Hopefully everyone can enjoy this master piece.

You really need to add rails jutting out from either end of the rail platforms. It's almost impossible to connect to train. I've managed to get one side hooked up, so I can use the platforms, but it took a lot of struggle, and the other side is a lost cause.

I'm completely baffled by this asset. It says Train/Metro but for the life of me I cannot connect train lines up, only Metro lines.

Does this work with the Metro Overhaul Mod? For me, the metro cars dont dispatch from the metro hub to my lines.. idk if im doing something wrong

I found the reason for my failure. I forgot to enable a dependency.It works now.

I get a load failure for this station. Loading mod says that "Station Track Sunken" is not found. I have searched the workshop without luck (so far as I can tell I have all the listed dependencies subscribed).
Does anyone know where I can find "Station Track Sunken"?

Thanks

@lobsterindc I believe there is an issue with some of these style multi-layer hubs and the 81 tile mod, apparently if you slightly shuffle the station with the move it mod it immediately fixes the issue, but you may have to do this every time you load a save

@jeffrey Try to learn some decency and then respond again!

I really love the look of this station but it's not working very well for me. My trains lines will connect but no one will get off there - and I spent a long time making sure the train stop was at the top of the line and not in the center of the hub, the intercity trains blow right through it and I have most of the metro platforms connected but my Cims are only using one of two of them. Ideas? Bulldoze and reconnect everything?

@DeathFox Check out https://steamhost.cn/steamcommunity_com/id/cyterion/myworkshopfiles/?p=2 and other metro stations by cyterion

I really hope to be able to build a dual-track subway station. My city needs it very much.

What I would love to see is a bus/train station. There seems to be every combo of station so far but for bus/train. its always bus/metro or metro/train.

Really wish this was updated with the larger platforms for the new CS update as well as also having smaller hubs to choose from.

Hi,
Is it possible to switch train and metro tracks? It may be separated version. Thanks in advance!

can you do a smaller station, like 3 train tracks and 3-5 metro tracks?

same happens to me, my citizens won't come in from the street, but I also manged to connect train and metro lines

I somehow managed to connect train tracks and lines to this station with Sunset Harbor (no other underground train station works yet).
I have however, encountered another problem: my citizens can’t use the front door. This renders any lines terminating at the station useless as they can’t leave the station except by way of connecting lines.

Any fixes or ideas?

@djplong I successfully connected the train station using lines in tunnel mode with road anarchy tool. Works like a charme

I've managed to have success using this with all my metro lines. I can even make 'through' lines with enough elevation changes in the tunnels. But I'm having a real problem with train connections. If there was a video showing exactly how this is supposed to look when done, it'd be a great help.

It seems like the 5 sets of tracks are already laid, with endpoint connectors, but it doesn't seem to work. I can dig tunnels at 36m that SEEM to connect them (going right through what should be the platforms) but no luck there.

This is the *perfect* downtown hub for what I like to do (and I have Disney's Contemporary Resort right across the street acting as a monorail hub) - but I just can't seem to get the trains going. The metros were comparatively easy (just planning how deep each through layer was going to be).

Help! Thanks in advance!

You can try my train-metro-hub until this one is fixed: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2075216582

Does not work. Cant connect. Have only one halt.

Please update for Sunset Harbor! Cant find any other underground rail and metro stations for inner city use!

Having looked around for alternatives, I find that there nothing close to this in function. Plenty of other nice looking ones, but nothing that looks and works as good. Though I could mash something funtional and probably ugly for subways, but I'd have no idea on what to do about the trains.

I think my city is dead without this asset

All of you subways are great, but if you were to update just one for sunset harbour, please make it this one.

This asset was perfect, until Sunset Harbour. They changed the length of the subways, and now they get stuck in the stations. I'd hate to tear the heart out of my city and not see the little cims running around between platforms, and doubt it'd ever feel as good after, so please can you update this to have longer platforms so that it's perfect once more?

If you're already doing this, I'll be patient and wait

The recent Sunset Harbour update, has caused problems, I can get this to work after a fashion. The metro trains are now longer, so the platforms need to be extended. And one of the platforms wasn't working. I couldn't get it to set up as a station.

there is no working with Sunset Harbor DLC, please fix...

I can connect trains and it is working. But only few passengers are using it. When I use a normal station, hundreds more are using it. So something is not working well..

@Adrift
@rafters1996
"Extra Train Station Tracks" is type of MOD that must be enable in contents manager.

Sorry, but I need some help.
So I'm using the Falcon train/metro hub in a new CS build.
Connecting the metro and using the stops : no problem.

But for some reason I can't use the train stops in the hub.
I've connect 3 external train rail point to a existing train rail with a other train station some distance away.
When I try to a a train stop in the hub, it doesn't take
(Same problem as Mackay_tt, KRYPTERIOn and Anton.

If tried connecting the tracks using Fine Road Anarchy 2 , but no difference.

It would be outstanding if it was MOM compatible.

@tcapp40 Use fine road anarchy 2

can't get the train tracks to connect

I cannot find the 1605016802.NTE - Falcon tracks rc1_Data: NetInfo missing to fix this problem. Every time I search for the tracks I come up blank, I need help please

Firstly thanks for your works. But, i wanna brief you about that problem.

Broken assets:

Custom Assets: 1605016802.NTE - Falcon tracks rc1_Data: NetInfo missing
Custom Assets: 1605016802.NTE - Falcon Metro/Train HUB_Data: Sub building BuildingInfo missing [BrokenAssetException]

Details:
No details

Doesn't allow intercity trains. For those having trouble connecting trains you have to use anarchy when connecting to hub. Successful connection will be squared at the hub

Thanks. I was getting broken mod errors at first, then I downloaded the required mods and now that has stopped so I'm about the try it out in my city now.

Hey!
I got a question!
Mine seems to work well enough but I got one specific metro-track that I can't connect. All the others seem to be fine but not this one.

So, do you - or does anyone - know a workaround or something?

Got all the required mods ... But it doesn't let me connect it. The trams seem to be able to pass it but the stop isn't in that piece and seems to be outside, so the game isn't able to find a path (it's actually able to tell me, that it couldn't find a path)...

Beautiful asset but I've been unable to get the trains to connect or act as a through route, but I have been achieving square ends to the tunnels. Upper four metro lines seem fully functional, while the lower four allow the passage of metro trains but not the definition of stops. I have got campus installed.

Mine is working, great asset! Is it also possible to run trains all the way though, like with the metro? Now it is only possible for trains to enter at the back.

same erros as kevan-wood is having here

This is not working for me and is coming up with this error on start up, please help.

Broken assets:

Custom Assets: 1605016802.NTE - Falcon tracks rc1_Data: NetInfo missing
Custom Assets: 1376960190.Central Station_Data: NetInfo missing
Custom Assets: 1360287207.Clus_Metro_Hub_Data: NetInfo missing
Custom Assets: 1605016802.NTE - Falcon Metro/Train HUB_Data: Sub building BuildingInfo missing [BrokenAssetException]

Details:
No details

Great idea, beautiful asset. But I am having the same problem with trains as KRYTERION and Anton. The train station in this asset will not connect with other train stations. The Metro lines do connect successfully, but not the trains.

Ahtoh, I am in the same situation. I am unable to get any type of connection or stop.

Hi, forgive me if it have been mentioned before somewhere, but I can't get the train connection or platforms. Could you give an advice? Thanks

only missing some bus/tram area to make it a full airport conection hub. cant wait to try it in a new city right at airport terminal exit.

When loading these, I always get that they failed to load.

It would be nice to have those station without the "power cheat". Do you intend to do this?