there is a error for if you do a b6 twin turbo engine swap, for where it wants 2 oil filters.

Are you uninstall it now, or no...?

The 3 rear drive shafts are little bit out of place but that is minor, so is the front strunts touching the fuel tank. The dealbreaker for me is the rear exhaust going through a belt and the crankshaft pulley.

cool mod dude :) its really well made with the modelling

hnací hřídel je tam zbytečná (převodová skříň nemá výhybku na hnací hřídel !!!), zadní nápravy z kol jsou napojený mimo, přední část výfuku je namáčknutá na motoru klikové hřídele, palivová nádrž zasahuje do horních ramen náprav

bruh i have 4 clip b's and i really cant find them.

I live in America. These cars were not available here (not that i would ever have a way to come into contact with one anyway hehe). I'm vaguely familiar with the car. I know a LOT more about American muscle cars than i do European sports cars hehe

i thought people knew the real car has the oil filler like the gas cap on the outside and would look for it

All's well that ends well. :)

THANKIES for those images! I NEVER would have found them without those. I wasn't expecting them to be so far forward from the engine location. Those images should be posted in the car's description, so other clueless builders like myself will know where to look. I love the car, and I had fun with it, and NOW it's 100%, and I could send it to the dyno for the first time. Woot!. Thankies again for your help with this!!

View from back:
https://steamuserimages-a.akamaihd.net/ugc/1192839234864657359/BF8D3F0C05A4EAFD8DC741682F0B47CB8428297F/

I'm on a 55" screen so easy for me to see. And the screenshots open in a browser to see better. In game you may have to rotate a bit or zoom out. Zoomed out you can still see them if you rotate to view from back (transmission in front of engine). If you still can't find them maybe try verifying game files. It's a strange setup due to the engine used but it does work as K 3 intended. :)

Couple of screenshots to show this works. Both oil filter and filler cap are in the same location. A little hard to find until you know where to look - must be in engine disassembly mode to fill with oil and remove oil filter, assembly mode to install oil filter.
https://steamuserimages-a.akamaihd.net/ugc/1192839234864604149/D178298324D695112D84FAF5B751A08990D19F03/
https://steamuserimages-a.akamaihd.net/ugc/1192839234864607940/B22D96A47CB86C0C396B7CA7C1232544295CBEF5/

I still haven't. I'[m trying. This makes me sad. I upgraded lots of the parts, I'm very curious to see what the dyno shows, but there's no oil in it, so I can't do anything.

Yes, engine view as in where you remove parts of the engine. Hope you get it sorted. :)

And yes, I have EVERY DLC. I seriously want to see what kind of power output the things have, but that's impossible with no oil, and I am seriously struggling with this.

I've got screen captures showing what I see. The big issue with the car not having an oil filter, is the car requires one for 100% complete. It's sitting at 99% because the Oil Filter is missing (according to the list of parts on the Build Sheet). I have TWO of these cars, but I can't even test them at the Dyno, because they have no oil in them. Engine View means you click on the engine as if to add or remove engine parts, yes?

Make sure you're in engine view and the oil filler cap should show up on the right side of the body. You can't get to it from other views. If that doesn't solve your problem I have no idea - works for me. As for the oil filter, maybe try the engine stand? Can't really remember if it has one. :)

do you have the porsche DLC ?

Ok I seem to notice a couple posts which say something about a "Service Set." I'm unfamiliar with such a thing. Can someone explain where this is? Maybe that is why I can't find a place to put an oil filter, or a place to put oil in the car.

Um...than why am i NOT able to locate where it goes during building? there is NO "ghost" oil filter anywhere. Not only that, but there is NO way to interact with what appears to be the oil filler cap, as the game just indicates that location as "Body." Which is why I asked if there was some sort of trick., David. Thankies for being so helpful, though, even though I did read his comment.

@ KrystalSkye70 he answered your question 6 posts below yours. :)

I'm running into an issue with the oil filter/filler cap. I cans ee where the filter appears it should go, but when in Build-mode, there's no "outline" of it, so I can't click to add it. Also, I don't get an option to click on the filler cap to even put oil in the engine. Am I doing something wrong? Is there some strange "trick" I don't know of? I can't complete the build at 100% without these two.

Nevermind, you just need to take off the front bumper.

I can't seem to reach the brake servo in the front of the car. It says it's accessible from the engine bay but the engine bay is in the back of the car and is too far from the servo to remove it.

I like it just as it is :D

its lighter than the actual car to make up for the lack power of Flat 6 in the game, next update when we get HP in the Config it will be fixed

Just rebuilt one and I have a question - what did you set the weight of the car at?
The reason why I ask is that I decided to fully tune this car as the power was rated at 251 hp.
Ended up at 457 hp. However on the track I had trouble braking because it was so fast. Seriously this car is faster than V12's! Managed a 51.9 sec lap on the vanilla racetraqck, could have been quicker if I really tried.
Collecting parts at the scrappy now, the next one I find is for keeps. Lovely car :D

the oil filter and filler is on the chassis itself for the older B6, when in the engine bay look to the right of the car

Nice car. You need to swap to the twin turbo to get the oil filter connection and the long oil filler tube. That is OK, but after the swap the B6 oil filter appears in both the left and right parts list columns. Since you can only put one filter on, I am stuck with a 99% rebuilt. Any chance the parts list could be edited to include only one oil filter?

can you find it in salon

introducing the motherf**king offroad porsche

every B6 can be swapped in the car, and the car comes with the non turbo B6 in-game because its the closest to the real engine

so the orginal engine for this is the b6 twin turbo do you think we cam add that into the list?

kia spectra please)
I have such a car)

Fuel tank seems to be clipping with the front suspension. Can this be fixed?

nice beautiful good profit when u sell it

good car but hard to find, thanks k3

Starter has to come off before gearbox - from memory starter is located in engine bay on top instead of underneath. :)

i have a problem i can't remove the gearbox

Thank K 3

Ahh thanks. Now i found it.

In the service set, its under the rear right fender, where the oil fill cap is

Ok. Understood. And where exactly can i plug the oil filter?

Will fix the rear window issue later in the day, im moving right now and didn't have time.

Beautyful Car! But where is the Rear Window? I cant find it. And where can i plug the Oil Filter?

Beautiful 959! My favorite Porsche. Thanks a lot! :-)

Im seal, not elephant!

suck my dick elephant

verenan
You little lollipop, the inventor of Porsche was Ferdinand Porsche and he was born in Czech Republic, and he escaped to Germany. So do not talk like you know something. I'd rather learn some automovite history and fill your mental cavity.