Worked for the first two leaks on a station I was near, then didn't work afterwards. There was 7 leaks total on the station and the mod only showed me a waypoint to two. The mod hasn't worked since :(

This is working perfectly

semms that the original mod on nexus has been updated on April, 13 2023 2:48PM

@Prior Micha:

sometimes the mod will work, or even not. - hard to say.

For me: the mod works fine yesterday, but if i load my save today the mod had stop working. (or may be its a game bug - idk)

What about [6.x]?

Doesn't work for me, I had the non-cheaty version installed before and that appeared to work, now I switched to this one and it doesn't work, it appears to work like the non-cheaty version. Perhaps there is some cross contamination of state between the two version, or unsubscribing from the other mod isn't enough or something.

still working at 5.10 and ToA

This mod needs updating like https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1780949818 to handle multiple stations. Not useful at the moment.

Updated version of the mod for 4.0.0. On the nexus. Was looking for this mod myself, might be useful. (nexusmods. com/x4foundations/mods/498)

In 4.0 hotfix 3- worked perfectly on the first station: Lines to every leak, marked from distance on their models. Sadly, it stops working after the first station per load

bump

@Syrius
That is actually an Egosoft bug, it's going on even in vanilla

I believe that this mod causes signals to not appear in scan mode. It happened multiple times for abandoned ships in my games.

red +1

Dear @Rocket Scientist. Please bring this mod back. Pretty please.

Is this mod still working?

First station I tried this with had one signal and of course it was inside the station mesh... but now the 'guide mission' this mod adds is stuck. Clicking 'abort mission' does nothing and going into scan mode near another station also does not get rid of it, nor does it start a new guide so it's no longer helping at new locations either. The inside station mesh bug can't be helped but it'd be great if aborting a stuck guide mission would work to get rid of it or reset it.

I am using the 3.30 beta and this mod makes the pilot of my ship get up and sit down over and over again. Lucy I caught it before it destroyed all of my saves.

any chance you can do something about the range in which you scan the leak cause some you cant get to in a medium ships specialy in split space something like 40metres instead of 20 and you could scan every leak easily with medium ships

@wizaerd I changed the line "<set_value exact="$ScanMode+1" name="$ScanMode"/>" to "<set_value exact="$ScanMode" name="$ScanMode"/>" in the ext_01.dat (removed the +1, line 92 in the non-cheaty version) and it now scans for both types without switching. I assume the same can be done in the cheaty version, but I have not tested it.

Is there anything you can do to eliminate the need to switch between modes? It's kinda a huge PITA...

Please put in the description above which version it is so people can find the right one

Also tested with public 3.00 beta (376550) and attached new screenshots from 3.00 Beta

Mod seems to still work 2.60 (372944)

something is buggy with this cheaty version if you scan a station point it dont update the mission and you cant switch the scanmission to an another station it freezes with the first scanmission of the points

@Takiro I have the same problem, it does not switch. However since the other version works and the only real difference between them is the range you should use the other one and change the range. To do this go to the X4 files (steam library/common/X4) then in the extensions folder find signal_leak_hunter. Open ext_01.dat with a good text editor (notepad++ on windows, probably anything on linux but I used geddit) and on line 39 change the DetectionDistance. I personally set it to 2km, as I think 8km is a bit too "cheaty" and most stations are larger than 2km so you still have to do some flying around. But with the default 250 you have to fly around every module and every nook and crevice which was a little too much for me. With 2km I could fly around a module and spot leaks on the other side, but you can change it to whatever you think is best!

Yea link does not work

Alos the link to the cheat-less version actually links back here, to the cheaty verison.

Hey, it looks like this version is not working anymore. Switching scan off and on does not switch signal types and the first signals found are active no mather how far I fly away or if I target another station. They are active forever, I can even switch sectors.

Good stuff.

nice, finally)