@The_Aviator22

That is the problem.
I dont have an engine
I have electrical motor though I may just build an engine because of this problem

You could use a clutch and fluid valves to deactivate the drive shaft and the coolant system combined with a numerical switchbox to lock the throttle at 1. This will cause an engine fire that will burn the ship down.

If needed I can send workshop file of the boat

@The_Aviator22

Stormworks stopped working for a month so sorry for late reply.
I got to building the but but when the ship is damaged how to I make the gun stop working? I had a damage system and it opens a hatch and floods the boat but the boat is so small it does not flood. So when my ship gets destroyed if I add the feature the engine will stop but the gun will keep on going which is a problem.

Any ideas for something that will sink or make the ship flip over?

I would use an electric relay to deactivate the electrical system when damaged. The shoot buzzer is for the sound made when firing and the hit sound is the sound that the system makes when a hit is scored.

I have questions about this.
1. what is the diffrence between shoot buzzer active and Becon and hit sount active?
2. How would a damage system work with electric motar.

Also its a boat

How do I install a damage system? I am using electric motars for engine.

You can put the laser beacon on the wing clear of the prop.

I like the system, just I was configuring my WWI era biplane with it, and it seems that the laser beams bouncing off the prop as it passes registers as damage. Is there anything I could do with frequencies to avoid this, or is such a thing impossible? Ofc any type of synchronization gear won't work in this game, any tips for me would me much appreciated.

Engine Fail connects to a engine failure system. Basically, Connect it so that if it is activated, it shuts the engine off.

Laser Distance sensors.

Also engine fail, what do i connect that too?

laser distance 2 in? Laser distance in? What do these go to?

Yes, comment if you have any questions. Send me a link when you finish it.

Hello i love your Microcontroller. It's ok for you if i use it for my workshop creation ?

There is an output on the sensor microcontroller labeled: "To Sensors In." Connect that to the input on the dogfight microcontroller labeled: "Sensors In,"

i cant get it to work i tryed to do everyng like sayt in the desciption but how can i connect the laser sensor module with the dogflight module?

Oh ok, thanks!

The gun sound comes from a modded buzzer.

just asking, but where is the gun sound coming from?

i give up on it

im trying to make a bomber whith this.

would it be possible for this to work on a tank?

You can add enough sensors to cover all angles. I find that 8 is enough for most aircraft.

I updated it according to your explanation.

I tested it and the beacon needs to be connected to the microcontroller and exposed on the front of the airplane.

Beacon is infront of the vertical stabilizer.

Is this ok: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1994414045

The laser beacon has to be open on the front of the aircraft.

Isn't 6 Laser Point Sensors enough? I added one for each direction.

Can I place Laser Beacon inside or does it have to be open?

Uhm, I wanted to build a plane myself with this mc but I dont know the sound you used, can you somehow upload the xml file for the buzzer?