Steam Community :: modular ECU

Store Page

Stormworks: Build and Rescue

All Discussions Screenshots Artwork Broadcasts Videos Workshop News Guides Reviews

Stormworks: Build and Rescue > Workshop > BETO's Workshop > modular ECU

modular ECU

Description Discussions0 Comments35 Change Notes

35 Comments

< >

r.aukeman 22 Oct, 2024 @ 1:16pm

never mind i just forgot to connect the exhaust

r.aukeman 22 Oct, 2024 @ 1:01pm

would you mind taking a look at my boat's engine and telling me what could be the problem? its not working but i'm not a great builder and could very well just be the engine, not your ecu.
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=3353189261

BETO [author] 7 Sep, 2024 @ 1:58pm

are you using a turbo, if so you'll get better results by making the ajustment decribed in the description.

Emissary 31 Aug, 2024 @ 8:27am

Sometimes it limits the RPS to 22? Sometimes it'll rev to 40RPS? Any idea why or how I can set a hard limit of 30? It seems if I drop a gear and that lower gear forces it to over 22RPS itll then rev as high as it likes until it drops below 22 again where itll sit until the same scenario occurs again

LegoLover4412 11 Nov, 2023 @ 3:06pm

i have used this in all my creations that have a modular engine. thank you.

BETO [author] 13 Aug, 2022 @ 8:41am

stoich is a value that goes from -1 (lean) to 1 (rich), a little richer can give you more power, while a little leaner can give more efficiency.

bongokat 13 Aug, 2022 @ 4:43am

What is stoich?

misteriora 10 Apr, 2022 @ 1:59am

i like this

BETO [author] 19 Mar, 2022 @ 9:43am

If you use it long enough it will adjust the map and it will be smooth, but if you have room for a pressure sensor this version will work better: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2781447446

Floppa 18 Mar, 2022 @ 7:05pm

Doesn't work well with forced induction, the RPS will continually fluctuate as the ECU is too aggressive with reducing fuel throttle value

DodoFish 2 Mar, 2022 @ 11:46am

Thank you very much, I had no idea they were directional.

BETO [author] 2 Mar, 2022 @ 11:32am

The ECU is working normally, the problem is that your catalytic converters are backwards so the engine only runs until the exhaust pressure gets too high

DodoFish 2 Mar, 2022 @ 3:27am

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2770527573 there you go

BETO [author] 1 Mar, 2022 @ 7:04pm

Could you send a link to your vehicle so I can replicate the problem?

DodoFish 28 Feb, 2022 @ 2:32pm

Actually after more testing it seems it just stops working after around 20-30 seconds of driving, I can leave it to idle for as long as i want.

DodoFish 28 Feb, 2022 @ 2:21pm

Any idea why it stops working after i exceed 10 rps? It works on other vehicles ive made and i have no idea why not anymore.

Yoyohay 20 Oct, 2021 @ 6:43pm

The highest efficiency I got was 40% idk if I did something wrong or it's just not working

FaultyAlty 10 Oct, 2021 @ 5:50am

Hey mate. Just wondering, is there a way to manually cap rps? Would like to max it at 30 with the driver operating the engine in that range (6-30), and it wasn't quite explained in your previous reply.
Thanks

BETO [author] 23 Sep, 2021 @ 4:42am

make sure you disabled the "use throttle as set rps" option, and also make sure you conected the engine composit signal.

Parzi knight 30 Aug, 2021 @ 1:30am

hi how can i change the max rps becase it works just fine but only thing i can change is idle rps it does not work with levers and it does not rev for me

BETO [author] 13 Jul, 2021 @ 4:16am

hi @Earnhardt Deserved It the original formula i made using trial and error (i wasn't perfect but worked) the one im using now i found on the game discord.

Sir. Gentleman IV 30 Jun, 2021 @ 3:35pm

It works