@lhsmithnet that does not sound good, though I don't play stormworks anymore so that will probably not be fixed by me

hi, for some reason this does not work on more than 2 trains- once you hook up more than 2, the 3rd and beyond wont be controlled. i used this controller before and it worked so something must have broke with an update

@Cam it has been a while so I don’t remember much but yeah probably

can this work on driven rolling stock?

@Skully

If you are asking how to send the button press through the connectors, you can connect the instrument panel to composite input front/rear nodes on the controller.

You also need to convert composite output front/rear into on/off signal,
connect both to an or gate,
connect its output to another or gate with the starter button on your train.

I got it to work. But what if I want to activate a button on the slave train that's on an instrument panel? I have an engine starter button there that I want to activate from the master train

Urk! now everyone has an incompatible standard. =0 First there was the Donkk TCC, which was very simple but basically worked, then there was SRC-TCP that was very advanced but incomprehensible and not usable in its current form. I was kicked off their discord so I developed my own suite of controllers (see my workshop), now I came across a build using your controller that is incompatible with mine and I'm like (!!!).

Also note that master button should be on at all times if not a slave locomotive. If you want stuff compact you can use an instrument panel too, there is a composite node for that on the microcontroller.

@kitten did you check the example? Also note the gearbox/electric motor setting on the microcontroller, may be set to gearbox by default.

didnt seem to work on either loco i have put it on, one is a shunter and one is a sd-45, both are diesel electric, the only part that seems to work is the passthrough that i use to auto start my other engine

I probably cant make a video but I can make a demo vehicle, thanks for the suggestion. @Demo440

Kan you give us a video to figer out how to make it work im having trouble
With it for my.CN D-1 Diesel train

Gearbox reverse may still have problems, but works like a charm if you have 2 locomotives. Diesel-electric trains should be working as intended.

I have noticed that some stuff was broken and fixed them, this mc also works with diesel trains now!

@kittenmaster142 thanks, I hope you like it!

my friend and i were going to make a master slave, but you beat us to it :)