Yes, the ship is ready to survive. To build a printer, you need to mount the small hinge head, the pilot's seat, and the projectors on the hinge. Insert the ship in creative mode and see how it's done.

Is this ship Survival Ready?
How can I build a ship printer?

The ship's center mass is balanced. This is a problem with the rotor ramp hinge, which still provides torque in gravity, even at 0 speed in locked mode. To suspend the ship in the atmosphere, use gyro intercept, and Cruise Control for automatic flight. It automatically stabilizes the ship. I hope the developers will correct this as well, as they corrected the ship's drop in gravity in the presence of subguides.

Ship DRASTICALLY tilts forward in atmosphere. Took about 2 minutes to crash itself.

From the airlock through the glass, the installed equipment is visible and the chassis is raised or lowered.

Looks good! One change I would make would be replacing the windows in the landing gear wells with armor panels.

Thanks. Your appreciation is especially valuable.

Very nice

Thank you for writing. To launch the drone from an external connector, you need to park it as shown in the second screenshot from the end and add a program block with the name TFCode and parameters watch_left / watch_right / watch_top to the navigator panel to activate the drone's guard mode in one direction. Drone automation scenarios are described in detail in the discussion. https://steamhost.cn/steamcommunity_com/workshop/filedetails/discussion/2573238109/4263206669440631287/

control panel number 7 8 9 for drone command are missing in the navigator seat