FYI - some of these have stopped working properly, at least on SDX. Specifically the curved 90 and the 3-port elbow.

@StrkeWyrm what do you mean ?
This is up to date for the most wanted update.
The original T conveyor pipe is still in the files for legacy builds but is no longer buildable since there is a vanilla conveyor now.

*most wanted

not clear from screenshots does this include /build on the warfare update?

Aryemis has very helpfully fixed a lot of the issues with this mod and it has now been pushed live.

Symmetry should now be fixed and components have been tweaked to match vanilla more closely.

The old T junction is still in the mod but hidden from G menu so it won't break any old builds, and now uses vanilla .mwm (they're the same orientation so it works).

Mod size is about 60MB now vs 90MB before

And new icons have been made for the SG armored stuffs.

Big thanks to Aryemis!

I'll look at it but all the collision meshes are set to the exact dimensions of the pipe.

Can confirm the collision issue as well. Just never commented because I have a large mod list, so something else could have caused it. I also tend to build pipes outside or in large rooms so it usually isn't a problem.

Oh, I forgot to mention that this pipe was there before I got your mod. I have not tested what happens if I destroy and rebuild it..

Hi Idiot :)

What I meant was your mod appears to overwrite the curved conveyor pipe and for some reason the collision on that pipe is different afterwards. I am standing on a steep staircase: https://i.imgur.com/Y4bAoO4.jpg

Normally I can pass right below that conveyor pipe curve. This is where I now have to duck in order to fit underneath: https://i.imgur.com/P5KZ7q0.jpg

And for some reason that pipe is now airtight: https://i.imgur.com/SETvYx3.jpg

@w00kie please send me an image of the issue or add more details. thanks :)

something with the colissions of the vanilla angled conveyor tube change for me when this mod was active. I had staircase that went underneath the tube that working fine before. With mod active I have to duck to fit on the stairs behind the tube.

Always. Anyway thanks for what you did fix. Now I can finish my transporter without it looking weird.

there's always something isn't there...
>..<

Just tested and it now works, except for the elbow. No transfer at all for the elbow.

Will test now.

\/ Fixed hopefully

Did some more testing and found that the corner, elbow, and 5-way will not allow transfer in any configuration. This is only happening on small grid pipes, armored ones are fine.

For some reason the small grid pipes emmisives never turn green and they won't transfer anything through them. For reference I was trying to pull uranium out of a reactor, trough a single small pipe conveyor, an O2 tank, cargo container, and connector arranged in that order. With the small pipe no transfer, replacing the pipe with a vanilla conveyor would allow transfer. Even tested with just a few straight pipes between 2 vanilla conveyor junctions, still no emmisive change and still no transfer.

anytime :)

That fixed it, thanks.

Hopefully just pushed a fix for that

Does anyone have a picture?

Same

Same here!

Just added this to a server but it has flipped all the right angle blocks about and when re-build or when using the blocks it will not "go green" and connect

no worries :)

Finally, a T piece. Thanks for this.

Those three connector pipes are much needed blocks. Thank you