I don't understand what you're talking about. Everything works fine for me.

BACK OF TRUCK IS GONE

Will it be updated to 1.55 or is there one ready now?

DO NOT USE as it doesn't work with 1.54 and needs to be updated... Horns are missing textures

top

Hi Sherman, thanks for keeping this mod going and updated! Any plans to add the flat top sleeper?

an accessory pack for the lt please

Big thanks !!!

! UPDATE !

- add cabin suspension

Oh, sad, well at lease someone tried.
Thanks

Т21К, swiftsure, I will do this in some future.

Ct140aw, I tried to do this a few years ago, but there are so many problems and errors (more than 3000) that don't validate through the loader. I don't have that much free time.

Would it be possible to add a freightliner century to the steam workshop?
Its my favorite truck but the only places iv seen it is 3rd party sites and I dont quite trust them so I was wondering if someone could add it to steam

There is one small issue in terms of unlocking the 9300i on a newer save, even for the day cab - the default 240gal aluminium fuel tank is locked to Rank 10, while every other accessory has an option which is available from the start, which essentially means the entire day cab option isn't available until Rank 10 (which is when most other sleepers are unlocked). If you can address that it'd be great, as I'd love to get a cheap used one of these as my rookie day cab while I'm levelling up.

is it possible to get more sleeper options as i was very dissapointed to learn that there was not flat top sleepr as i am trying to build a reallife fleet

The author of this mod should add support himself. Write to him.

is there any chance we could possibly update this to support zeemod engines? thanks

The thing is that this model is just "9300" no "i" is needed only thing international did was update the interior which the dashboard.
They started using the "i" branding after they updated the cabin design similar to that of the scs 9900i.

! UPDATE !

- add interior shadows
- some fixes

Dude, you're a fucking savage! How did you manage to animate the sprung cab? Almost nobody does this with standard configuration mod trucks, usually just the cab overs. Either way ATS doesn't even have a sprung cab for the base game 389, and this mf does it for an International. Good job boss.

It looks like the truck from BeamNG

Nice truck, although no SiSL mod support is bit disappointing.

Also I found small glitch - in sleeper cabin, when you try to put on "Map" accessory to table in the back, suddenly it turns short chassis with remain sleeper cabin.
It's not a big problem if this doesn't leads reset all customization...

just because you find it on another mod site doesnt mean its illegal

Thanks for keeping this mod going.

Is there a template at all?

Thank you for taking care of this mod. If you're in touch with Overfloater, best wishes to him!

There are two 9300 generations (if you can call it that). They do not differ externally, but inside, including the interior, they have differences. I have not found any official information that these two versions are somehow designated by the manufacturer.

In this mod we have the second version of 9300, with the same dashboard as in 9900. Therefore, I myself added the letter "i" to the name to denote the second generation of this model.

haha gavril t series go brrr

thx

@ batmansteve I believe it's: intnational.9900i :)

whats the def name

Do you have a paint pack for this truck or is that in the works?

beamg driv turcjk

PLEASE. do up the k100e, its my most driven truck and the updates seem to be slowly corroding it

Yes, please spoiler on the roof!

I forgot to ask,
Would it be possible to put the daycab spoiler from the 9900i, on the daycab of this 9300?

i love it,
But just like with the original one from Overfloater, part of the right indicator lightmask bleeds over into the foglights.
I was kinda hoping that would've been fixed.

But overall, It's still a nice truck.

Is the truck a mod or just accessories in game, I dont understand.

This is such a great mod, thank you very much for continuing work on it!


If you're interested in suggestions, I do have two – the "Decoration Lights" beacon accessory doesn't quite line up with the 9300's hood model, could these be adjusted slightly?

Also, it would be great if the Horn Adaptor accessory node could be added to the sleeper cabin as well – I know the original 9900i's 72'' Sleeper doesn't have it, but I think it'd make for a really nice addition.

And a slight graphical issue I've noticed – the inner sides of the high beam headlight models (pointing toward the centre of the truck) seem to have a wrong material assigned to them? On either side, a slight yellow glow comes off them at all times (even with engine and parking lights off) and use of the left indicator also slightly illuminates both sides of it orange – this may be worth a check.

would love to hopefully see a 4x2 chassis with the 72 sleeper

BeamNG truck real

I hope someone brings back that peterbilt 377/335/379x mod

Thanks man I've been wanting to play with Truck once again on 1.49 and 1.50 for ages!

@Sherman thank you for the 9300. :)

@Sr Olguin I'm adding support this weekend (today or tomorrow as I type) for my main engine pack.

Всем дратути, хорошего дня и отличного настроения. Дальше Круче! Спасибо огромное за Трак.

@Trucker unlike the beam ng truck this is a real truck

9300 no i bud but could say 9300 ih also do know these are a light / mid heavy haul rig i wanna say you had to order them unlike others models but great job im og fan of overfloater mods

Hate to be that guy but uh theres no such thing as a 9300i. There is such thing as a 9300 though.

This truck looks so much like the Gavril t-series

i have a suggestion for this truck possibly a flat top sleeper

YOOOO ...SWEET

No mate. The BeamNG devs took inspiration from the front of this truck.