wow ok, look up on this roads!

Ok

With Metro Overhaul, I've found you can also plop this as a joint Metro/Train station. Very handy!

I can't connect Trainlines manually with this station :'(

the station does not accept intercity trains

Hi, when I place the station (on a flat terrain) an elevated wooden sidewalk appears in the back. Can anyone fix it?

Looks great and functions excellently.

I was looking for somewhat large (at least larger than just the default 1-tile-wide 2-track stations) train stations or hubs, but most required a whole list of confusing mods that I didn't want to commit to. All I have is the Spawn Points Fix mod in case the outside connections didn't want to send me trains, and this station works perfectly. The outside connections deliver tourists to the track closest to the street, and the second track works as part of my inner-city train line.

And the traffic jam of criss-crossing trains is gone!!

doesn't show up under stations

its working for me, however when the passengers get off the train they just walk anywhere including on the track and walk on the track up the line

@unimike: Yes it's working fine for me, running ND. Both train tracks work.

Anyone can confirm if this works for ND update?

I am using multitrack enabler though, as I need it for my metrostations, might that be what is messing up?

The outermost track seems not to attract trains form other cities...

I'm having the same problem @Tommer had two months ago. Just downloaded this fresh today for the first time. I'm using it as a tourist train / commuter train interchange (to avoid having my city train system jam up with red tourist trains). Since building it, not a single tourist train has visited it.

Hi Drosovila, love this station and have many of your buildings. I'm having lots of trouble with getting a train to stop on both sides of line 2. It just keeps giving me the cannot find path error. With or without shift. So as is, I can't find a way to use this as the middle station on a line. Only as a terminus or my cims cant get home from work :(

Hey! Thank you for the best 4-track station! And I have a question. I see that it accepts the outer trains only from one direction, despite on I've connected it to two. In other words, from the "right" come outer trains (then they change direction and depart to the "right" they went from), and no even one train from the "left". But why? Is it defined behavior or not? Thank you

@theqentity They are supported since After Dark. But only since 1.4.0 it's possible to set up them in Asset Editor

huh? did CS do a vanilla update re multiple tracks?

I checked my assets list and it says last updated 5 days ago so I must have used the new asset since I only started this city 3 days ago, I'm not sure what's going on there then :o Regional freight trains are passing through on both tracks on the way to the freight station, so I know the rails are connected properly and regional traffic can get to the station

I was only playing yesterday when I was having this problem, I'm not sure if the mod was up to date, it should be since auto updates are on, I can check the version now and try again

when was that. It was broken but since the last update it should be fixed. (18. June)

I used this station in a small tourist centric city build where this station is the only station, expecting tourist trains, but no tourist trains came or spawned at the station. In comparison when I built the default station next to it, lots of trains spawned at that station instantly - I think this is broken in terms of tourist trains?

Traffic ++ is dead, v2 doesn't have the multi track enabler built in so you mist get the multi track enabler mod

Zooming all the way down to the train station makes adding the stops in the tracks a lot easier.

My mistake, I works fine with the Multi-Track Station Enabler; its just a bit hard to click in the right place for the two inner tracks. No Traffic++ nor Traffic++ V2 installed, just the Multi-Track Station Enabler. Thumbs up for the mod :)

I haven't been able to use the other two tracks. Traffic++ gives the error message about "getrightandleftlane"; I didn't have it installed before. Tried Multi-Track station enabler, also didn't work. Finally tried Traffic++ V2, the mod itself works but I still can't add lines to the inner tracks of this station. Tried clicking, holding Shift, Ctrl, Alt, and any combination between those three.

Is there a way to make it work or is it just outdated?

any one tested this with t++v2 and is it working after snowfall update

Outdated?

I think this needs an update. Any chance?

YOU NEED TRAFFIC++ OR MULTI-TRACK STATION ENABLER. FOR ALL 4 LANES TO WORK PROPERLY.

OTHERWHISE YOU'LL ONLY BE ABLE TO USE THE OUTER 2 TRACKS.

so this only functions as a 2 rail without AD or am i doing something wrong

Все работает нормально.

Okay, now I wanted to use the other two tracks with multi-track enabler.
No chance.
You say with shift I get the inner tracks.
I didn't use shift before and got the two tracks on one side so I considered with shift getting the two other tracks but that doesn't work.

As inside the station with fps mod looking around, about half of the platform is not reachable by passengers from the train.
Imagine, you're in a train, standing at the door, waiting for the train to stop and open the doors.
As soon as the door is unlocked, you open it and there is a wall in front of you.
You have to go to another car to leave the train.

감사합니다^^

Thanks for the update - looks great

Thats because I updated it to have night lightíng :P Shouldnt dissapear from now on..

My stations disappeared in After Dark

work it an After dark?

░░░░░░▄▄▄░░▄██▄░░░
░░░░░▐▀█▀▌░░░░▀█▄░░░
░░░░░▐█▄█▌░░░░░░▀█▄░░
░░░░░░▀▄▀░░░▄▄▄▄▄▀▀░░
░░░░▄▄▄██▀▀▀▀░░░░░░░
░░░█▀▄▄▄█░▀▀░░
░░░▌░▄▄▄▐▌▀▀▀░░ THIS IS Alstarn
▄░▐░░░▄▄░█░▀▀ ░░
▀█▌░░░▄░▀█▀░▀ ░░ COPY AND PASTE HIM,
░░░░░░░▄▄▐▌▄▄░░░ SO, HE CAN TAKE
░░░░░░░▀███▀█░▄░░ OVER THE WORKSHOP
░░░░░░▐▌▀▄▀▄▀▐▄░░
░░░░░░▐▀░░░░░░▐▌░░
░░░░░░█░░░░░░░░█░░░
░░░░░▐▌░░░░░░░░░

@aleex Well you can. It's still a functional station. It's just that only 1 track will get trains.

So if traffic++ and multi-track station are bugged, we can't use this station right? :(

I even increase the bus budget but I still can't even handle the passenger load. I think it's a bug that's why the pedestrians won't disperse.

wait traffic++ works. But when my train starts using the 2nd track, I get like 800 tiny sims standing on the side of the road and won't disperse. So my game came to a crawl so I had to disable traffic++ and bulldoze the multi track train.

Same problem as ams083, Taraffic++ doesn't do shit.

Nice looking station. Will regional trains use this mod? Or do I have to demolish my default train station for the regional trains to go here instead? Thanks.

nice passenger train station

no matter what I do, I cannot get the second tracks working. I have tried with both Traffic++ and the multi-track station enabler. Is there something I am missing???

非常好

@Drosovila : You can add "required items" to this asset