You paved the way. Thank you :)

NICE

A must have mod if there ever was one. Thanks for your work Mafoo

Мод отличный, но не пора ли обновить?

The Catwalk blocks in this have a really bad phantom collision, it seems like they're using the same collision as the half-plate.

To create supportive scaffolding, half blocks and edges would be really, really useful. Any chance?

Good morning Mafoo. Love these blocks - always wondered why one could not paint the LOD stages. This makes it so much easier to put scaffolding up - not to mention saving tons of hours grinding! I did notice one thing that triggered my OCD... when you place the blocks side by side, there is a small gap as though the blocks are not touching.... it isn't major, but then again, when the OCD kicks in... it kinda is. I'm not complaining... just wasn't sure if you had noticed.

it should still work, just the item groups will be 'missing' this is something i intend on fixing

Is this mod still functional after all of the updates and changes to SE?

Actually, that's the slope tip (I think, Keen's naming structure isn't the most consistent), the half slope is the one pictured here: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1800752909

Half slope is in the pack pictures 1, 3 and 4 on the right hand side

Would there be any chance of a half slope scaffold block? (I think half slope is what keen call it)

I second the girder Idea. It would give girders another use.

Great mod. I really like it a lot. Is it possible to change the required materials to Girders as I think this would make it more realistic?

New Version
Added PCU Value

its all good man, looks great, appreciate your time on this mod!

Maxyall i don't quite understand, the bevel corners and edges are in the orginal construction models made by keen which this is based on.
I have considered a scaffolding version that woudl look more like strucure supports but not had teh time to do anythign with it

Hey I like your mod up until the point of NOTICING THAT YOU MADE THE CORNERS ROUND HOLY SHIT IT LOOK LIKE SAPERATE BOXES INSTEAD OF ONE, STRONG INDEPENDANT STRUCTURE THAT DONT NEED NO STEEL ARMOR IM TEARING MY HAIR OUT JESUS CHRIST

New Version
Should address missing models and textures!

Getting an error with missing icons.

MOD_ERROR: Colourable Scaffolding Blocks, in file: J:/SpaceSaves/Mods/767398130.sbm/Data/CubeBlocks.sbc
Resource not found, setting to null or error model. Resource name: Textures\Icons\ScaffoldCatwalk.dds
MOD_ERROR: Colourable Scaffolding Blocks, in file: J:/SpaceSaves/Mods/767398130.sbm/Data/CubeBlocks.sbc
Resource not found, setting to null or error model. Resource name: Models\SmallScaffoldCatwalk.mwm
MOD_ERROR: Colourable Scaffolding Blocks, in file: J:/SpaceSaves/Mods/767398130.sbm/Data/CubeBlocks.sbc
Resource not found, setting to null or error model. Resource name: Models\SmallScaffoldCatwalk.mwm
MOD_ERROR: Colourable Scaffolding Blocks, in file: J:/SpaceSaves/Mods/767398130.sbm/Data/CubeBlocks.sbc
Resource not found, setting to null or error model. Resource name: Textures\Icons\ScaffoldCatwalk.dds

Now it works, thanks alot

New Version
Should address the incorrect mount points

Looks like both are missing their front Mount point, i will look at fixing that

HI, it seems that you cannot connect the light and heavy slope base blocks with its tips

New Version
This should address the missing icons that @Goldobsidian reported

Im not sure if the updates broke it but I keep getting errors like this in my log file.

MOD_ERROR: Colourable Scaffolding Blocks
2017-08-24 20:00:33.396 - Thread: 1 -> in file: C:/Users/Goldobsidian/AppData/Roaming/SpaceEngineers/Mods/767398130.sbm/Data/CubeBlocks.sbc
2017-08-24 20:00:33.396 - Thread: 1 -> Resource not found, setting to null or error model. Resource name: Textures\LightScaffoldBlock.dds
2017-08-24 20:00:33.396 - Thread: 1 -> Created definition for: Light Scaffold Block

New Version
This should now be the full version!

Great up date here

New Version
I have released the 2x1x1 blocks, they are incomplete model wise but data is correct, the two inverted corner heavy blocks are missing there vertical struts but that is coming soon(tm)

Just to let you folks know the Corner to tip/base blocks are coming, i have built the basic light model in blender but i need to start filling out the physics and mount points so unfortunately won't be today

New Version
I have published a new version that includes mirroring data for completed blocks. (the 2 part corner blocks will get theirs once i finish their models!)

Sounds good I use these alot mostly large ones but building small freighters

I will take a look at the mirroring as i think Harag's tools for blender included something to help with it

the mirroring is off on the small block versions. If I get the chance I will correct but its tough for me to do modding anymore.

Auto sub thanks!

New Version
I have recreated the X bars on the light models so you don't get texture fighting

@Stroomschook yes I was aware of this happening when I created the new models, unfortunately because I am using a number of transforms in blender to do the repetition it is a bit tricky to shift them around, I will see if I can move one of the bars on the X/Y axis so they at least stop fighting, my preference would be to put the weld texture along the joins but they are only available in grey

There is some z-fighting for the textures on the crossing bars of the light block. Keen's current build models of the light armor block have the crossing bars slightly apart now. Maybe use that?

They're good blocks, Brent.

makes me think i should create the lod models

https://steamhost.cn/steamcommunity_com/profiles/76561198035116802/screenshot/158028391353946151

Project I am doing using these blocks

New Version
Included mirroring kindly done by lylesonders

http://pastebin.com/0wrrmbyH

This is the link to my corrected mirroring copy. I have only completed the slabs slopes base and tip the corners and inverted corners are giving me a lot of trouble so I am only doing those as I need them. the main ones however the slope, the base and tip, rounded slopes and the slab are the ones I use the most so all have been corrected. Once i get the rest completed I will let you know. Thanks

@lylesonders if you put your corrects (as a complete file) up on pastebin or something similar I can integrate them back into the mod

I am currently building an enormous drydock with this mod. love the way it looks, only thing is the mirroring is off, any plans on correcting this in furture update. As is makes building in symetry impossible. I will be doing a local copy of the mod to correct the mirroring issue for constructing but would rather have the original mod as it will not let me build online.

New Version
This should address the development flag that appeared on the mod. But no idea how as it was published in stable!

https://steamhost.cn/steamcommunity_com/profiles/76561198184941085/screenshot/94974011261739620

Thanks so much for the speedy fix, @Mafoo !
I didn't check the spotlight-only attachment as it's uneccessary for my project, but the scaffold slabs do attach across the faces of the spotlights once again. :)

Keep up the great work, and I look forward to any future mods you make!

New Version
Fixed missing side mount on light and heavy slab

@alice_muse92 this should address your problems, although i need to check the mounting on the spotlight I will do that later

https://steamhost.cn/steamcommunity_com/profiles/76561198184941085/screenshot/94974011258489630
https://steamhost.cn/steamcommunity_com/profiles/76561198184941085/screenshot/94974011258488892
https://steamhost.cn/steamcommunity_com/profiles/76561198184941085/screenshot/94974011258499383

And here's a picture of what it looked like previously
https://steamhost.cn/steamcommunity_com/profiles/76561198184941085/screenshot/101727694604410516

alice_muse92 i can't see why it wouldn't let you do that as all i did to the mount points was punch some holes to make them not airtight, could you provide a screen shot of what you are attempting to do then i will beable to take a look at why it's not working?