Kauppasivu
Medieval Engineers
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Medieval Engineers

Kauppasivu
Medieval Engineers >  Workshop > Käyttäjän Johnbeere Workshop
Ei tarpeeksi arvosteluja
[Abandoned] 4-6-0 Locomotive
Kuvaus Keskustelut0 Kommentit49 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Type: Blueprint
Tiedostokoko
Julkaistu
Päivitetty
698.159 KB
3.1.2019 klo 18.29
7.1.2019 klo 18.42
4 muutosilmoitusta ( näytä )
Vaaditut luomukset
Tämä luomus vaatii kaikki seuraavat luomukset
Tekijä
Johnbeere
Kirjautunut ulos
Näytä kaikki 7 kokoelmaa
1,103 Uniikkeja kävijöitä
239 Nykyiset tilaajat
14 Nykyiset suosikit

Tilaa ladataksesi
[Abandoned] 4-6-0 Locomotive

Kuvaus
A third locomotive has been posted here:
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1620103280

A second locomotive has been posted here:
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1616083138

A small locomotive, heavily inspired by this locomotive on the workshop: https://steamhost.cn/steamcommunity_com/workshop/filedetails/?id=1605185799

To use this locomotive, the rope belts must be connected properly. The manner in which they should be connected can be seen in the photos above.

When pasting, be extremely careful. Not alligning the blueprint to the track can result in the locomotive exploding.

Please join our Discord where you can talk about trains, ships, planes, tanks, and more in ME, here: https://discord.gg/VUMmkQe
49 kommenttia
< >
Johnbeere  [tekijä] 13.1.2019 klo 5.44 
Well, real early 4-4-0's were pretty weak, anyway. I also find that measurement of the HP of the steam engines rather dubious and would not think anything by it.
onca77 13.1.2019 klo 1.29 
4-6-0 does go 32-35km/h. 4-4-0 may be underpowered. Its engines give just 80HP (that's <60KW). If the power estimates in transport fever have anything to do with reality, that's the power of first locomotives without cab.
Johnbeere  [tekijä] 12.1.2019 klo 9.36 
Granted, I may just need to weigh it down more. All three of mine are equipped with weight boxes.
Johnbeere  [tekijä] 12.1.2019 klo 9.35 
Well, have you tested my 4-6-0? I've never gotten it past 12 mph.
onca77 12.1.2019 klo 9.21 
They actually don't. You said 20mph on flat for the 4 axle one. That's 32km/h with wheels smaller than medium.
Johnbeere  [tekijä] 12.1.2019 klo 8.19 
Very interesting. You have to wonder, then, why do my locomotives perform badly?
onca77 12.1.2019 klo 3.46 
One more interesting issue: I've decided to test rope stabilization on my suspension. While it improved the sustained speed under certain conditions and greatly reduced jumping, it caused an extensive wear of the wheels. While none fell off, all of them required repair after the test.
onca77 12.1.2019 klo 3.22 
Conclusion: While mor rigid suspension does help a little it is not that big a difference. It seems that the critical factor is the number of axles.
onca77 12.1.2019 klo 3.11 
OK. The result of the test:
* With Your suspension (stabilized by ropes) the loco max (peak) speed 43km/h, sustained speed about 36km/k. One wheel lost towards the end of the test without critically imparing the performance.
* Mine (present version): peak about 47km/h sustained about 39km/h.
Conditions: 4-8-4 Heavy with all three engines at max throttle with 50 weights in the midestion chest.
onca77 12.1.2019 klo 1.57 
@Xaerthus: That's exactly what I've tried to communicate.
@Johnbeere: That would be unlikely. It seems that the hitboxes are flat on the top. Rather, there may be some tiny but sudden changes of angles at the section merge points due to whatever method Equinox used for calculating the geometry of sections when merging them. Splines should not cause problems but I do not know what was really used. Also there is an issue of how the simplified algorithms of the game engine handle the interacion with hitboxes. The dependence on the computer resorces points to that as a culprit.