商店頁面
Stormworks: Build and Rescue
全部 討論區 螢幕擷圖 藝術作品 實況直播 影片 工作坊 新聞 指南 評論

Stormworks: Build and Rescue

商店頁面
Stormworks: Build and Rescue >  工作坊 > C4RB0N 的工作坊
評價次數不足
Beacon Locator Buoy
介紹 討論區0 留言17 更新註記
   
獎勵
加入最愛
已加入最愛
移除最愛
Vehicles: Vehicle, Air, Rescue, Sea, Multi-vehicle, Exploration, Technical, Creative, Underwater, Fire, Subassembly, Advanced
標籤： v0.10.17
檔案大小
發佈於
242.479 KB
2020 年 5 月 11 日 上午 9:34
1 項更新註記 （檢視）
所需的項目
此項目需要下列所有項目
連結
YouTube (External link) Sketchfab (External link)
建立者
C4RB0N
離線
查看 C4RB0N 與其他人建立的所有 430 個收藏（有些可能設為隱藏）
3,861 不重複訪客人數
8,303 目前訂閱人數
84 目前最愛人數

訂閱以下載
Beacon Locator Buoy

在 C4RB0N 的 2 個收藏中
Airbus A400M Compatible Equipment
20 個項目
Beacon Locator System
2 個項目
描述

Beacon Locator Buoy designed to be used with this Master Station to form a Beacon Locator Network

It can be easily air-dropped from my Airbus A400M Cargo Plane


The System:
This Beacon Locator Buoy + Master Station system allows to locate multiple Emergency Beacons on the map at the same time.

You can place multiple Buoys around the map (up to 60), and the use the Master Station to collect all the information from the Buoys (within 40km).
Accuracy depends on the amount and position of the Buoys: with with a good grid of Buoys you can have ~30-60m accuracy, with bad grid you will have ~100-300m accuracy.

For the best results, place the Buoys with a distance of ~10km between them.


Credits:
CrazyFluffyPony, for his Beacon Locator System




Enjoy! Please consider leaving a Rating and a Comment. Feel free to write any Suggestions or Issues you might have in the comments below.
17 則留言
< >
Janne 2024 年 9 月 3 日 下午 12:52 
Is there a way to refill your plane with Buoys without despawning the ones you already deployed?
C4RB0N  [作者] 2021 年 5 月 15 日 上午 3:37 
@spacechaos202 Have a look at Pony's Beacon Locator System (https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2060370662) , it's the one I used as the framework for mine, and it basically uses both GPS position of the Buoys, and the time between beacon pulses to triangulate the position of multiple Beacon Locators.
Trophy 2021 年 5 月 14 日 下午 6:54 
@C4RB0N Hi! I am working on my own beacon locator, but I can't for the life of me figure out how to turn transponder pings into distance from the time between them. If you're okay with sharing, could you please let me know how your system does this?
C4RB0N  [作者] 2020 年 8 月 26 日 上午 10:34 
@KingTiger101 Well, that's still valid for the Buoys, since they don't have electric connectors. So remember not to exceed 180knots when transporting them, and to lock all the Cargo Tracks.
Elonovich Muskowinsky 2020 年 8 月 26 日 上午 9:55 
@C4RB0N They were on. I read in another one of your creations' description, that the rails are not strong enough to hold things when going above 180 knots or something like that, so I just attacked a cargo crate with the iso connector and used it to block the buoys.
C4RB0N  [作者] 2020 年 8 月 26 日 上午 3:44 
@KingTiger101 That's because you have to turn on the Cargo Zones rail brakes, from the Loadamaster's Station or Ramps Panel monitors.
They automatically turn on for 20 seconds when spawning, to prevent cargo from moving around freely, and allow you to manually lock the desired zones.
Elonovich Muskowinsky 2020 年 8 月 25 日 下午 4:26 
For some reason they all gather at the back of the plane and get stuck. I have the rail connectors on.
C4RB0N  [作者] 2020 年 8 月 23 日 上午 10:12 
@williefili Use a Bigger Workbench to spawn the A400M, and then copy-paste the Buoys inside.
williefili 2020 年 8 月 23 日 上午 9:12 
1st of all i cant the creative base wont let me spawn the airbus and 2nd of all i have no clue how to use the select tool.
C4RB0N  [作者] 2020 年 8 月 21 日 上午 11:53 
@williefili You can easily spawn them directly in the Cargo Bay by placing them with the Selection Tool in the Workbench.