상점 페이지
ARK: Survival Evolved
전체 토론 스크린샷 아트워크 방송 동영상 창작마당 뉴스 가이드 평가

ARK: Survival Evolved

상점 페이지
ARK: Survival Evolved >  창작마당 > Grebog 님의 창작마당 > Randomly Colored Dinos > 토론
Randomly Colored Dinos
설명 토론4 댓글186 업데이트 노트
 이 토론은 고정되었습니다. 중요해서 그렇겠죠?
Grebog  [개발자] 2017년 4월 19일 오후 2시 41분
HOW TO SETUP COLORSETS
It is now possible to set a predefined colorset (see the list below) for each dino, female and male version.
some creature like ants do not have a gender. in this case the male version is used.

After starting ark with this mod installed, several ini entries are written to the GameUserSettings.ini
here is an example for the island map, there will be a section for each played map.
[ColoredVanillaDinos TheIsland] Default=1 Megalosaurus=1 Direwolf=1 Stag=1 Anky=1 Mammoth=1 Sabertooth=1 Rex=1 Argent=1 ...

These entries are automatically created by this mod.
If this does not happens, use the "admincheat saveworld" command
to save the world and write the GameUserSettings.ini


each entry defines the colorsets for all (Default=) or each individual creatures (i.e. Direwolf=1)

[Creature]=[Female Colorset],[Male Colorset]

There is only one female and one male colorset possible.

the following formats are available (see below for a list of names of the available colorset)

set Default=, if you do not want a global colorset for all creatures, each dino keeps its own colorset.

Example 1:
Direwolf=DarkLight
this entry sets the colorset for both, male and female direwolf.

Example 2:
Direwolf=
if you leave the value empty, than the mod default colorset (RandomAll) is used.

Example 3:
Direwolf=Green,Red
the first parameter is the female colorset, the second the male colorset
in this example the female colorset is the Green colorset and the male colorset
is the Red colorset
Example 4:
Direwolf=Blue,
the first parameter is the female colorset, the second the male colorset
here is female the Blue colorset and the male colorset is the default Ark colorset

Example 5:
Direwolf=,Blue
the first parameter is the female colorset, the second the male colorset
here is female the Ark default colorset, because it is empty and the male colorset is the Blue colorset

Example 6:
Direwolf=,
if you enter only a comma, then the Ark creature specific colorsets for
female and male are used.
in this example it is WolfFur for both female and male wolfs


The 1 is the default colorset and the same as RandomAll and
contains all colores available in Ark except the basecolors: Red,Yellow,Green,Blue,Magenta,Cyan.

If you want also the base colors included, change the 1 to RandomMale, which also contains the base colors.
The RandomFemale contains more colors as the default colorset RandomAll, but also not the base colors.

OPTIONAL INI Option in the GameUserSettings.ini
The following entry prints a list of all available colorsets to the logfile.
[ColoredVanillaDinos TheIsland] Debug=True

Mod ColorSets:
Red
Light
Dark
RandomFemale random colors, more than RandomAll
RandomMale like RandomFemale including the base colors
Green
Yellow
Brown
Blue
White
Black
DarkLight mix of dark and light colors
RandomAll same as colorset 1
OrangeBlue

Default Colorsets:
Megalosaur
WolfFur
Bigfoot
Akylo
Mammoth
Saber
Rex
Argent
Chalico
Purlovia
Stego
Dimorph
Raptor
Scorp
Carno
Doed
Allo
Dodo
Para
Trike
Sauro
Ptero
Dilo
Oviraptor
Turtle
Compy
Moschops
Pegomastax
Ichthy
Phiomia
Ant
Dragonfly
Monkey
Tapejara
Therizino
Troodon
Iguanadon
PachyRhino
Equus
Boa
Achatina
Quetz
Gigant
Kairuku
Titano
Thylacoleo
Coel
Mega
Sarco
Piranha
Basilo
Leeds
Spino
Baryonyx
Kaprosuchus
Dimetrodon
Diplocaulus
Eel
Ammonite
Tusoteuthis
Scorp
et_Vulture
Arthro
et_Mantis
et_Jugbug
et_Moth
Camelsaurus
et_Jerboa
Moschops
et_RockGolem
et_DeathWorm
et_Wyvern_Fire
et_Wyvern_Lightning
et_Wyvern_Poison
Grebog 님이 마지막으로 수정; 2018년 6월 12일 오전 11시 00분
< >
전체 댓글 21개 중 1~15개 표시 중
Dragnier Draconai 2017년 5월 26일 오전 4시 11분 
Could you make a way to turn off the random colors for specific dinos? I've used several mods that add dinos which rely on a specific coloring ot set them apart from everything else but this mod in combination when those mods ruins that. However, I love the random colors on the non-modded dinos.

If there were a way to set these .ini values to -1 for disable or something, that would be awesome because I could have the random colors on vanilla dinos and still have the modded ones use their intended colors.
#1
Grebog  [개발자] 2017년 5월 26일 오전 7시 45분 
I have updated the info above to be more clear how the Default= works.
You can turn of the colorset for each creature:
Default=,
YOURDINONAME=,

set Default to , so the female and male colorset is empty.
set the name of your dino, which should use its own colorset also to ,

The mod creates the list of dinos in the gus.ini automatically, this works 100% in single player, but not always on the server (i do not know, what the ark devs have changed).
If you need this list on your server, first start a single player game and copy the ini entries to the server ini.
Grebog 님이 마지막으로 수정; 2017년 5월 26일 오전 7시 50분
#2
GG Fizz 2017년 6월 1일 오후 7시 18분 
so if i what all the colors all i do is Direwolf=RandomMale?
#3
Grebog  [개발자] 2017년 6월 1일 오후 11시 57분 
@gg fizz, if you want all colors for all dinos, you do not need any ini entry to change. If you want a direwolf to be colored and no other dino, you do the following entry:
Default=,
Direwolf=RandomFemale,RandomMale

or if you want only the direwolf male to be colored:
Default=,
Direwolf=,RandomMale
#4
GG Fizz 2017년 6월 4일 오후 8시 19분 
ok cool thanks :D
#5
123 2017년 6월 17일 오전 1시 04분 
is there any way to give a dino multiple color sets? like if i wanted a equus to possibly be red blue or black?
#6
Grebog  [개발자] 2017년 6월 17일 오전 1시 10분 
no, not in this version of the mod. but i will look into the idea to merge colorsets
#7
Ihmislehma 2017년 7월 1일 오후 1시 16분 
Would it be possible to have a breakdown of the custom colorsets (for example what Light colorset includes and so on)
#8
Moonslyde 2017년 11월 25일 오전 1시 42분 
Nothing from this mod is written to my GameUserSettings.ini. Server has auto-saved the world many times.

I use Ark Server Manager to launch the server. I don't know if this prevents anything being written to the GameUserSettings.ini, but it does have it's own GUI for managing mod entries and their values.

Edit:
I ran it in single player and the mod generated the code in the local GameUserSettings.ini. I copied and pasted from there and added it through the Ark Server Manager GUI. I suspect Ark Server Manager is the reason why it has never written to the server's GameUserSettings.ini.
Moonslyde 님이 마지막으로 수정; 2017년 11월 25일 오전 2시 45분
#9
Grebog  [개발자] 2017년 11월 25일 오후 5시 13분 
sorry, i forgot to answer, but you found the solution by yourself.
#10
Max 2018년 3월 1일 오전 11시 55분 
I did try but fail, what's the quickest way to give only females (any dino) a random color but keep males as Ark default.
Would I have to make "Default=RandomFemale," and also the same for each and every dino entry?
I tried setting only the default but seems then and would make sense that the individual dino settings would override the default.

With "Default=RandomFemale," and each other dino entry at ...=1 the males also received vibrant non ark default colors which is not what I wanted.
Max 님이 마지막으로 수정; 2018년 3월 1일 오전 11시 57분
#11
Grebog  [개발자] 2018년 3월 1일 오후 2시 03분 
you can only set Default and delete all other entries (backup first)
or set each individual dino
#12
Max 2018년 3월 1일 오후 4시 24분 
That's what I did first and I still got colorful males, will try again, if not I have a simple way to add entries for each one.
Thanks for your reply, will give it another shot!
#13
Grebog  [개발자] 2018년 3월 1일 오후 8시 23분 
The mod should fill the ini with the dinos, you can change the ini with search & replacé easily.
#14
Max 2018년 3월 3일 오전 9시 27분 
Yup, working as intended with only coloring females, imported the ini from SP game as on DS it didn't fill in the ini as you had remarked above.

Thanks!
#15
< >
전체 댓글 21개 중 1~15개 표시 중
페이지당 표시 개수: 1530 50