Mağaza Sayfası
Stormworks: Build and Rescue
Tümü Tartışmalar Ekran Görüntüleri Çizimler Yayınlar Videolar Atölye Haberler Rehberler İncelemeler

Stormworks: Build and Rescue

Mağaza Sayfası
Stormworks: Build and Rescue >  Atölye > Marcotics Kullanıcısının Atölyesi
Yeterli oy yok
Type VIIC U-boat (U-557)
Açıklama Tartışmalar0 Yorumlar15 Değişiklik Notları
   
Ödül
Favorilere Ekle
Favorilere Eklendi
Favorilerden Çıkar
Vehicles: Vehicle, Sea, Exploration, Wip, Technical, Underwater, Mechanical, Advanced
Etiketler: v0.10.14
Dosya Boyutu
Gönderilme
2.972 MB
24 Nis 2020 @ 2:17
1 Değişiklik Notu ( görüntüle )
Oluşturan
Marcotics
Çevrimdışı
5 koleksiyona göz atın (bazıları gizli olabilir)
1,225 Tekil Ziyaretçi
469 Mevcut Abone
9 Mevcut Favoriler

İndirmek için abone ol
Type VIIC U-boat (U-557)

Açıklama
Spent a lot of time making this. Most of that time was spent tweaking. Yes it's not perfect but I would have to spend a lot more time tweaking even more stuff.

Yes. I know the interior is somewhat advanced for a ww2 uboat and not entirely accurate but I wanted it to be more functional and easier to use than a traditional multi-crew uboat.

How to use:
- Turn on main battery.
To Drive using diesel: Turn on main engine systems (i.e. Fuel pumps, Diesel ignition) and use ignition key. Throttle up.
To Drive using electric: Turn off all diesel-related systems. Turn on electric main and electric ignition key. Keep throttle low unless you want to run out of drive battery very quickly (0.10-0.20 recommended).
To Dive under: Push fill ballasts button (it is finished when alarm stops). Use Depth AP (USE NEGATIVE NUMBER!) to dive and toggle the Depth AP button.
To Surface: Toggle Empty Ballasts button and wait (you can use depth AP to surface without emptying ballasts if low on battery).

Notes:
-Obviously, keep Air Intake above water in order for engines to run, use electric if below water.
-Torpedoes are definitely a WIP and just fire for now. Once you turn the key you have a few seconds until the motor kicks in.
-Depth AP is a bit jumpy once you're at the desired depth. I know this and just don't have time to perfect a PID to fix it.
-Gearing needs to be adjusted some. It does automatically downshift below a certain depth to help with drag but its not perfect.
-I mainly upload things to the workshop to backup my builds but I make it public for anyone to use.
-I honestly can't even be bothered to take good screenshots and upload them since this is mainly for personal use, but the default one doesn't do it much justice - it looks fantastic in-game.

I spent a lot of time on this and as far as I'm aware its the easiest-to-use and most accurate (externally) u-boat on the workshop. It's a lot of fun and I had a lot of fun making it. Enjoy!


WW2 WWII World War 2 Uboat u-boat german germany submarine nazi kriegsmarine
15 Yorum
< >
Marcotics  [yaratıcı] 25 Eki 2020 @ 10:19 
Yeah tbh the torpedos are mainly for show. They work but don't work too well. I can't remember what exactly was in the microcontroller but if there is some sort of depth hold you should be able to easily edit it and increase the altitude. So if its set to say -3 change it to -1 or -0.5 or something.
Bruce 25 Eki 2020 @ 6:30 
Not sure if youre still active but do you know if theres a way to trim the fins on the torpedo within your micro controller? the torperdos work awesome but sink to a low depth.
Engie Deer 5 Tem 2020 @ 11:41 
also
yesterday i wached das boot and i found out that there are not enuf beds cause submarine like this carries 44 to 50 crewmembers also there are rooms short

i know youve workt a looooong time on this u-boot you dont need to change anything its just to tell more about submarines
Engie Deer 1 Tem 2020 @ 6:14 
thx
Marcotics  [yaratıcı] 30 Haz 2020 @ 9:23 
Theres a generator control to the far left of the control panel. Obviously you must be surfaced to use it.
Engie Deer 30 Haz 2020 @ 8:53 
question
how do you recharge the electric engines
every submarine uses the diesel engine or a generator to recharge the engines
Marcotics  [yaratıcı] 5 May 2020 @ 8:57 
Yes but it would be a lot more difficult and time consuming to make them in stormworks.
NTSFMagellan 2 May 2020 @ 15:04 
As for making them functional for what works? You could fit more stuff in with the IRL ballast layout.
Marcotics  [yaratıcı] 1 May 2020 @ 11:44 
I mean I wasnt going for realism with how the ballasts are laid out, just making them functional with what works in Stormworks. If the uboat goes up and down, I'm happy lol.

Also, mann, I considered making a newer submarine like that, would be cool. There is a lot of similar nuclear subs on the workshop that are really good already, however. Keep your eyes open though.
Nerrad 1 May 2020 @ 11:33 
Hey could you make the Type 212A Used in the Bundesmarine.