Stormworks: Build and Rescue

Stormworks: Build and Rescue

Not enough ratings
Diesel/Electric Locomotive
   
Award
Favorite
Favorited
Unfavorite
File Size
Posted
Updated
623.188 KB
25 May, 2022 @ 9:49am
21 Sep, 2022 @ 1:29pm
5 Change Notes ( view )

Subscribe to download
Diesel/Electric Locomotive

In 2 collections by McLaren2009
Cargo Containers and Cargo Handlers
80 items
McLaren2009's Trains and Train Cars
35 items
Description
This is a fairly basic diesel train locomotive. It has a 4 cylinder (5x5) modular engine, 4 medium batteries, a track switch system, lights, a radio, a map display, and an ability to be controlled remotely by a second locomotive. It uses a personal micro-controller to control the engine and brakes for all cars in a consist. The locomotive has levers for the throttle, reverser, independent brake(locomotive), and the train brakes. There are also cameras facing forward, backward, and along the sides of the train. The switches for the coupling mechanism can be controlled from inside the cab. This is a pretty decent locomotive for moving cars, cargo, and people around the game world.

Starting the locomotive is very simple. Climb into the cab and activate the fuel pumps using the purple switch on the back wall. Start the engine using the bright red key switch also on the back wall. The 4 levers in front of the cab control the throttle, reverser, and brake systems. Be advised that the train brake also partially activates the independent brakes for the locomotive.

The external control system takes into consideration if the locomotive is facing the same direction as the controlling locomotive as well as if it is in front of or behind the controlling locomotive. The "External Control" switch indicates if the locomotive is not the controlling vehicle in the train, while the "Power from Rear" switch indicates that the controlling vehicle is "Behind" the current vehicle. This means that normally data would be passed from the front vehicle along the train to the rear vehicle, but it can be configured to control the train from any position in the consist without issues. There is also a switch to invert the transmitted Reverser position in the event that the current locomotive is not facing the same direction as the controlling locomotive.

The micro-controller uses the following channels to control all vehicles in a consist:

Numbers:
- 1. Throttle Position of controlling vehicle
- 2. Reverser Position of controlling vehicle
- 3. Independent Brake Position of controlling vehicle
- 4. Train Brake Position of controlling vehicle
6 Comments
McLaren2009  [author] 25 Nov, 2022 @ 9:17am 
I loaded the version of the locomotive on the workshop. The throttle needs to be set above 0.15 in order to get it moving. The reverser has to be forward (or backward) and the brakes have to be released. My newer locomotive is a little better and more responsive, but this one does still work.
McLaren2009  [author] 25 Nov, 2022 @ 8:24am 
Can you release the brakes or use the reverser? Both the independent and train brake levers need to be released in order to unlock the wheels. The reverser is directly connected to the drive clutch so it has to be either forward or reverse for the throttle to move the locomotive after releasing the brakes. You should be able to push the locomotive by hand if you release both brakes.
quocthailam 24 Nov, 2022 @ 5:48pm 
i cant move the train
Canadian_67 29 May, 2022 @ 6:30pm 
no, i like the look
McLaren2009  [author] 29 May, 2022 @ 5:10pm 
I worked on freight cars themselves and only seen locomotives from a distance. I wanted to make it in a way that you could still walk around it even though the build area is kinda small.
Canadian_67 29 May, 2022 @ 4:50pm 
thats one funky looking locomotive