Subscribe to download
Inland Oil Rig | EcoPetroGreen Solutions

1. To load a rod, take a rod out of the rod storage rack on the left side of the platform. Slide the rod out and over the outer railing and grab the end of the rod and place it in the arm clamp.

2. Navigate to the panel next to the drilling darrick and turn on the "Arm Clamp" and "Drilling Darrick Clamp" keys. The rod may need to be moved around a bit but It will then lock into place.

3. Navigate to the control room and turn on "Panel Power" and press and hold the button labeled "Pumpjack Up" and turn on "Turntable Clamp". Once the Pumpjack reached the top of the drilling derrick, head back towards the rod loading station.

4. Move the rod backwards until the tip of the rod is aligned with the edge of the arm clamp. (The rod may have to be spun by your character)

5. Press "Tip Rod" and the rod will move horizontally towards the drilling darrick then push the rod down into the turntable until it locks.

6. Head back up towards the control room and turn on "Pumpjack Clamp" and move the pumpjack down until it locks to the rod.

7. To start the drilling process, double check that all equipment / personnel are clear of the drilling equipment and press “Start / Run Drill”. After you strike oil, turn on “Start / Run Oil Pumps” so any oil that is found will be collected.


1. After the rod is in the connecting area of the drilling derricks slider. (REVERT to steps 1-6 in part 1 of now to load another rod)

2. An indicator labeled as "Rods Aligned" will illuminate. Press the "Connect New Rod" button to lock the new rod into place.


When the pumpjack makes it to the drilling derricks clamp when drilling DON'T STOP the drill! For some reason if the pumpjack stops the well still gets deeper! After the well has stopped increasing its depth, you can disconnect the swivel clamp and the turntable clamp and move the rod down far enough for a new rod to be connected.


"At EcoPetroGreen Solutions, we are dedicated to revolutionizing the oil industry by pioneering environmentally responsible oil drilling and refining practices. Our mission is to harness the power of solar energy to drive sustainable operations, minimizing our carbon footprint and fostering a greener future. Through innovation, efficiency, and a commitment to renewable energy sources, we strive to extract and refine oil with the utmost respect for the planet, ensuring a harmonious balance between energy needs and environmental stewardship. Together, we're redefining the industry, proving that responsible oil production is not just a possibility but a necessity for a sustainable tomorrow."


Sawyer News: https://steamhost.cn/steamcommunity_com/profiles/76561198443297702
Fluorescent Light Fixtures: https://steamhost.cn/steamcommunity_com/id/bassalicious

If there are any questions, comments, concerns, please post them in the comment section below.

DO NOT REPOST ANY PART OF THIS VEHICLE | EcoPetroGreen Solutions ©