FIXED EASY!!! Hi all, stormorks boilers no longer have a pressure node, and a lot of these nuclear reactors used a pressure reading for various safety features... To fix this creation and probably a lot more like it, just see where the boiler "Fluid level" or whatever its called leads to, its likely that used to be a boiler pressure node, they got combined. So just remove any logic related to boiler pressure.

Best of luck, I hope creators realize this and make the required fixes but in the mean time you can do it!

this doesnt work the rods wont insert i wish it would work but i cant get anything out of it:(

is there a way to cause a meltdown from within, i want to trigger a few warheads once they detect a meltdown to simulate a nuclear explosion from battle damage

I've uploaded a fixed version until the creator updates the original (thanks to kadeg3 for the fix), here's the link:
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=3238496484

I dont think it works anymore. It wont insert the fuel rod and so the reaction dont happend. Might have been one of the last updates the messed it up :(

Thanks alot i used it in my underwater base ( https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=3153836825 ). Works and looks cool!

Looks like a marine laptop

That works, but make sure to set the low of the temperature threshold to -100 in case you go near the arctic.

Fix to the Boiler problem. I just put on two threashold gates, one for boiler temperature(high 105, low 0) and one for boiler pressure(High 7, low 0). Then the on/off output of both threshold gates goes into both inputs of an And gate. The output of the And gate goes into one input of a second And gate. Second input of the second and gate will recieve the on/off signal from the Reactor On/Off button at the control panel(so this operation only happens when reactor is running) Finally, the output of the second And gate goes to both pumps that feed reactor coolant to and from the boiler and reactor core. Hope this helps!

Also with this logic setup, you can keep a boiler producing good steam and never blowing up, also you wont overheat your condenser so easily. You can run a single simple closed loop from boiler(completely full of water as it spawns) to turbine/piston to condenser and back with no extra water tanks, pressure relief valves, any valve work, or complicated logic.

the problem is that the pressure builds to much. the boom you hear is the boiler exploding

Im going to use this in a small nuclear sub I'm working on that may be uploaded to workshop at some point. Can I use it with credit?

can you fix it

Could be the overtemp or overpressure safeties kicking in. Haven't made time to circle back and retune these after the dev revamp altered figures and goofed it.

any guess as to why after a bit of running the temp dips and the generator stops

thechort you are an absolute chad for doing this thank you

Keptin I've fixed your reactor. Feel free update your workshop item with it and adjust to your liking later so everyone gets the fix.

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2781149060

Hey folks, I'm glad you like my creation, and I'm aware that an update has broken it. I won't get around to fixing it anytime soon, but you are welcome to develop a fix, upload it, and link it here. That's the best I can do, since I'm not actively playing SW atm. Cheers!

Hi! It seems that the reactor is broken. It starts up perfectly fine but after a couple of seconds the boiler pressure and temp drops, and the generator goes to about 7. I would really appreciate if you would take a look at this, especially since your reactor is very high quality, compact and reliable and stands out compared to some of the other reactors on the workshop.

А зачем в последнем резервуаре OverPressure налит дизель ?

Он нормально работает только под водой ?
Я пытался его на поезд установить, а у него постоянно бойлер взрывается ...

How do you refill the reactor tank?

how explode

Can I use this in a vehicle? I wanna make a nuclear plane but I can't figure out how to make my own reactor

how do i use this like where to connect the pwoer

Ooops, no if it's not functional then that's not intentional. It may have been unplugged when I was rebuilding things in the last iteration.

I'm curious, but have you intentionally left the overpressure system undone? Is there some problem with it? Or is it just useless?

Hi ! Are you sure you want to upload a vehicle that incorporates this system ?

Awesome! Enjoy Joseph! Thanks for crediting me!

I have used in an addon linked here:
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2586561953
Have credited you in desc. with links to this page and your community profile page.

Ah okay, thank you so much for the reply!

Not sure what it's run length is--only tested it for 10 mins or so at most, but best guess is several hours or more before it dips below it's rated output. Green represents fuel rod temp, purple represents how much the control rods are being used in percentage.

Im curious, what is the run time for this before it becomes inoperable? Also, what do the numbers in the purple and green represent? Im sorry for the odd question, just getting into nuclear stuff.

I'll probably keep this as-is. There are ISO reactors out there if that's what you're looking for. You could also easily modify it yourself.

Is there any way you could make this ISO connection compatible? I'd love to hook this up to my sky crane and transport it to my mobile ISO bases.

BenTender my friend is building a submarine with the larger version. I cant wait to test it when his is done.

Have a total of 12 chargers to sit at .76 on system batteries. The chargers are trash and more are needed.

Hmm, that is odd, I'll take a look and see if I can come up with a fix. Thanks for the heads up Talia!

For some reason your generator layout with the battery chargers isnt charging the systems battery... It's nice to have cause isolation but i can't seem to get it to charge even at full tilt.

If this can't be solved I reccomend a breaker to isolate the battery from the generator and a breaker to isolate the systems from the battery so it doesnt drain at idle/off.

ima put in in a plane

PLEASE SOMEONE BUILD A SUBMARINE WITH THIS PLEASEEEEE

subscribed, awarded, and favorited. Same to the mmr-4660. Great work I love it!

I'll love to see it but I don't need it for right now. This is perfect for my ship once its up to speed. Now i can sail forever and realize, there is nothing out there come on devs give us more to do.

Awesome man! I've been working on a higher output version as well for ship needs that I should have finished up today.

Success. Peak is actually 2390 in my experience but they're going strong. I can sail my ship anywhere now due to complete electrical power needs being met for cruising.

In this case I actually only need two of these on my ship to power it now that it's passed certification to make sure it doesnt go 3.6R. Then I can work on my ship without running out of power.

The magic of flywheels.

400 to 2350???

This is pretty dang cool!

The most updated one should charge itself. There's a charging block in the back that only allows charge one way into the system's power so the user can't go beyond the generator's capacity and drain the system. So as long as you have the latest one as of about an hour ago, you're good.

Should I be concerned that the reactor itself doesn't charge it's own electricity?