@mrdo2000 Yes In fact, this mod was specifically created to be the 81 Tiles 2-compatible mod for these functions, since the old Building Anarchy mod wasn't compatible (and couldn't be fixed).

is this compatible with 81 tiles?

@reaamann Use Ploppable RICO Revisited and ensure you've activated the option in the options panel for growable buildings to survive outside of the correct zone (see that mod's wiki for more details).

Growable buildings keep despawning when placeing, even when choosing a placement. How to stop them from deswaping?

i want to place houses etc

@Lord Bloodfart There are powerline network assets on the Workshop that you can place along roads when using Network Anarchy. And even some roads that come with powerlines built in. Neither of which have anything to do with this mod, of course.

@pablopmorales99 Yes, if you change the placement mode.

Does this mod allow you to place a building wherever you want?

@algernon I tried, but can't seem to reach the creator (Quboid)...
It seems that this problem will not be solved for a while.

@CW_1250 Okay, so a different problem. That's how Move It is currently working - have you raised it with its creator already?

@algernon The problem I'm having is kind of like the one Frog GamePlays had, but not exactly the same (both happened when using Move it) - My problem is that when I use Move It to move a building whose foundation followed a smooth terrain, the state of the building changes and it becomes forced to have a flattened terrain.
Simply put, Move It is changing the terrain mode that Building Control set for the building. (English isn't my language, my expression might not be accurate. Sorry about that.)

@CW_1250 Sorry, I'm confused - is that two issues? Or do you mean something else? Or just the same as what Frog GamePlays says and what you wrote is incorrect?

I ran into a problem similar to @Frog GamePlays. When I used Move It to move the foundation of a building to follow the height of the terrain, it would switch to the state of forcing the terrain to be flat instead of following the terrain height like before.

@blackbackpack Understood, but if you're looking at free-range visuals then that's really your only option. This mod adds additional controls and flexibility to buildings - but they're fundamentally still buildings, and that comes with inherent restrictions. I don't know *exactly* what you're trying to achieve, so I can't give any advice other than to try it and see if it works for you.

@algernon yes but P.O. its giving me too many issues and has too many features that i'ill never use...

@blackbackpack In conjunction with Move It you might be able to achieve that, but I'd recommend using something like Procedural Objects instead if you want to do that.

Can i make floating buildings with this mod? like no foundation or terrain, just the building vibing in the air :)

Your Mods Are Incredible.Well Done!The building no longer needs to worry about the exit. It can be repaired wherever you want.

@Frog GamePlays I'll take a look at it. Nobody's requested that before.

Hi! The copy with move it dont work with your mod. Only old mod. I set building with params, plop it, but when i copy building, it lost the configuration and i need to do one by one. Can i have a way to copy the sets?

@algernon Alright, thanks a bunch! ^^

oh wow, thanks so much! i was beginning to think it was either something that got removed, or a false thing from a dream!

@Saplaiceen Try Customize It Extended .

wasn't there a mod that could modify like, service buildings in-game? like, i could modify how many fire trucks spawn per building or how many students a school can have, like in the asset editor? i thought it was this but i cannot find such settings or a mod that does so.

@Purple Brick Advanced Building Level Control .

Abandonment is part of building leveling, so doesn't fit with this mod, which is about building placement.

What do people these days use to stop buildings from being abandonned? Are there plans to incorporate it into this mod?

@MacBurn The "slope is too steep" restriction is a network restriction, not a building one. You can try "Network Anarchy".

I am looking for mod that will allow me to place a metro station even when vanilla says "slope is too steep". Does this mod do that? if so, how? It does not seem to be working

@Pixelclone Not yet - that's already on the list of planned features, though.

Am I able to change the settings of the building once it is placed? I only get the Building Options panel before placing, but not after, so if I place a building then realise later it needs a certain connection, I can't find a way to update it without deleting it and replacing it.

@paulp575123 Yes, I'm afraid at this point it looks like an issue with Steam - you'd need to contact them directly. Good luck!

@algernon - Should I ask for support for Cities Skylines or is this a Steam problem - that this Mod won't install and that I'm not getting notifications of posts in this thread?

@algernon - Went through the steps to verify installed games. Found no problems.

@nilepereiraa Added to the list!

Is it possible to add a defaults option in the settings? I don't want to have to manually set every building I place as "Pathside or Ground", I want to set that as the default and change it as needed

@paulp575123 I'm certainly getting the notifications, as are others - if you're having issues, try Steam support.

Your local steam client has an option to manually verify your game files - see here .

@algernon - Not sure what you mean by "verified your local game files via your Steam client". Every time I open CS to play, it does a verification and no errors pop up.

Is there a way to manually verify my local game files with online CS?

I think there's something wrong with this asset's web pages because I don't get notifications via e-mail of your replies. I've posted comments before on other assets pages and got an e-mail that there was a response. And yes above this comment it does say "Subscribe to this thread" and there is a check mark before it.

@paulp575123 I honestly don't know if changing it to somewhere within the US would have any practical effect, but I'm not an expert on Steam downloading.

No, mods and assets can't "block" each other, so that's not the issue.

I assume that you've verified your local game files via your Steam client?

@algernon - Found where to change it. Changed from "US - Seattle" to US - Los Angeles". Didn't help. Still not downloaded.
I do see a new folder in this folder: D:\Steam\steamapps\workshop\content\255710.
Is it possible one of my other mods and/or assets is blocking this mod? I Only have 48 mods and about 250 assets plus 28 DLS (according to Skyve).
If so, should I disable all my other mods and then unsubscribe and re-subscribe to this mod and then re-enable my other mods?
I have a Skyve shortcut on my desktop. When I click on it it opens, but I still don't see this mod listed.

@paulp575123 Steam settings (I think via Steam client -> Stem menu -> settings is easiest), then go to 'Downloads' on the menu to the left. At the top of the Downloads page should be the 'Download region' setting.

@algernon - "Steam download region"? What is that and where might I change that?

@paulp575123 Definitely a Workshop issue. One thing you could try is changing your Steam download region to somewhere else, restarting your computer, and then changing it back. Beyond that, I'm out of ideas, I'm afraid; if that doesn't work you'll need to contact Steam support.

@algernon - I forgot to mention I am logged into the Workshop and even though I'm subscribed to the Comments, I'm not getting notifications of your replies.

@algernon - Yes, It's still not loading.
I even checked the Windows Task Manager to ensure neither Skyve and Cities : Skylines were not running when I first unsubscribed; waited 5 minutes; and resubscribed.
After resubscribing, I don' see the folder (2996538702) in the D:\Steam\steamapps\workshop\content\255710\ folder so it looks like it's a Steam problem.

@paulp575123 You should be able to see the file 'BuildingControl.dll' in that 2996538702 folder (don't go into any sub-folders such as Translations\Core). If you can see it, go into Skyve again and check again that you can see it there (be sure to refresh Skyve), as it's most likely been downloaded since your last attempt.

If you DON'T see that file, or if you still can't see it in Skyve, make sure that both Skyve and the game are closed, and delete that folder (2996538702). Then unsubscribe/resubscribe to try to force a clean download.

Yes, this is a Steam issue, and not a mod/game/Skyve issue.

@algernon - Found the folder here: D:\Steam\steamapps\workshop\content\255710\2996538702\Translations\Core
What in particular should I be looking for that tells me it's installed?
Also, maybe the problem is with the Stream Workshop? I see I am subscribed to this thread, but do not receive notifications. Yes, I've checked my spam/junk folder and no notifications are in that folder.

Building anarchy successor! Hooray :D

@paulp575123 It will depend where you've installed Steam. By default it would be in C:\Program Files (x86)\Steam\steamapps\workshop\content\255710; the item you're looking for is a directory with name of the ID of this mod (2996538702).

@algernon - Whenever I want to subscribe/unsubscribe I ensure CS is not running.
In fact, I just looked here and see it says "Subscribed"; CS is not running.
Unsubscribed; waited about 5 minues; resubscribed; waited 5 minues; opened/start CS and it
s not there in the Content Manager or Skyve.
Where would I find the "mod folder in the workshop downloads" folder?

Thanks.

@paulp575123 The game should NEVER be running when subscribing/unsubscribing, so I hope that wasn't a "last resort" for you.

Can you see the mod folder in the workshop downloads? It sounds as though it hasn't downloaded, which would be a Steam workshop issue. Did you restart your computer and try Skyve again?

Why can't I add this to my game?
I do have the prerequisite (Harmony) and have tried several times to add it without success.
I've even gone to the point of ensuring the game was not running while adding it.
I'm adding it through the workshop (yes, I am logged into the workshop).
That works and says "Subscribed", but when I open the game it's not there - not in the Content Manager nor in Skyve.