船好

Major updates, details as follows.

Omni+Spec
1) Reworked the Conjecture-class Abyss Landing Craft, fix its mounting position and significantly improving the piloting experience.
2) Updated texture depth and interior decoration of the cabin.
3) Reassigned the external camera previously controlled via the cockpit mirror interface to the surveillance centre.

Spec
1) Rebuilt the Note-class autonomous following drone, now operated via Periscope controls. After disconnection, the drone will remain in hover mode. The auto following system has been significantly upgraded, including automatic disengagement when approaching the submarine too closely.


(All content within the list can be found in the image descriptions. This is the text version for reference)

重大更新，细节如下。

综合型+特化型
1) 重做了猜想级深渊登陆艇，并修复了其挂载位置，大幅度优化驾驶体验
2) 修改了贴图深度+船舱内饰
3) 讲驾驶舱镜控的舱外摄像头改为监控中心控制

特化型
1) 重做了注释级自动跟随无人机，目前改为镜控操作，离控后会保持悬停。跟随系统大升级，并在里母船过近时自动关闭跟随。

(所有内容，均可在介绍图片中找到，此处为文字版）

@Acid, if I understood correctly, you are asking why the note drone can dock automatically on Corollary II but not on Corollary I. This was my oversight, and the issue has been resolved in the latest version.

I used the simplest method: linking a wire from the note drone's submarine dock panel's 'distance sensor' to a delay component. This setup enables the note drone to auto-dock once it is close enough to its docking point on the submarine. The delay component ensures that the auto-dock function activates only after the 'close enough' signal has been sustained for a short period. Without this delay, you might not be able to release the note drone from the submarine. To complete the docking process, you need to turn off its auto-follow mode and use the navigator to guide it toward the docking point. This will ensure it fully auto-docks.

How do you make the note drone auto dock?

@Kevin, I have checked the engine, and the mechanic will fix it while squatting on the stairs. I then tested it by using a grenade on every part of the submarine and letting the AI handle the repairs. It seems to be working properly. My suggestion is: are there enough diving suits on the submarine in your situation? The bot will refuse to enter regions full of water without a diving suit. Hopefully, this helps. Could you also provide me with more information about this bug, such as photos or videos?

@kevin Let me check it, thanks for reporting the bug!

No AI support? Mechanic is running back and forth on the stairs trying to fix the engine I think :(

综合型+特化型
修复上出舱口的自动门在舱室漏水时无法打开的严重bug
如果你使用的是旧版本，可通过断开上出仓口两侧舱门其底部的继电组件的“设置状态”部分的电线来修复此问题

对造成的不便深感抱歉！

Omni+Spec
Fix the serious bug that prevents the automatic door at the upper exit hatch from opening when there is a water leak in the chamber.
If you are using an older version, you can fix this issue by disconnecting the wires of the 'set state' part of the relay component at the bottom of the doors on both sides of the upper exit hatch.

My apologize for any inconvenience caused!