If you make your own custom logic board, heres a list of what all the logic does so its simple to setup on your own. Just make the group id's unique. (Ramp left, Ramp right)

Big Ramps needs big logic, everything behind the "[Large Ramp]" is extra for the large ramps and can be ignored by the smaller ones.

Logic Board setup: (In order Open->Opened-> Close->Closed)

Timer Block Open 1
- Tab 1
1. Ramp Hinges - Hinge lock On/Off - Turns Off hinge lock
2. Ramp Hydraulics - Toggle Block On
3. Ramp Hydraulics - Reverse
4. N/A
5. N/A
6. Mag Lock - Autolock On/Off - Turns off Autolock
7. Mag Lock - Unlock - Releases the Ramp
8. Red Signal - Toggle Block On
9. Event Block: Opening - Toggle Block On
- Tab 2
1. Timer Block Open 1 - Toggle Block Off


Event Block: Opening (Hinge Bot)
Event: Angle Changed | Equal or greater than | 0 | Hinge Bot | And Gate
1. Timer Block Open 2 - Toggle Block On
1. Empty
2. Timer Block Open 2 - Trigger Now
2. Empty
3. Ramp Spotlights - Toggle Block On
3. Empty


Timer Block Open 2
- Tab 1
1. Ramp Rotor - Toggle Block On
2. Ramp Rotor - Rotor lock On/Off - Turns Off Rotor lock
3. Ramp Rotor - Reverse
4. [Large Ramp] Ramp Rotor Hinges - Hinge lock On/Off - Turns Off hinge lock
5. [Large Ramp] Ramp Rotor Hinges - Toggle Block On
6. [Large Ramp] Ramp Rotor Hinges - Reverse
7. Event Block: Sensor - Toggle Block On - Turns on Ground Sensors
8. Event Block: Opening - Toggle Block Off
9. Event Block: Opened - Toggle Block On
- Tab 2
1. Timer Block Open 2 - Toggle Block Off


Event Block: Sensor (Sensor Hinge) Ground detection
Event: Angle Changed | Equal or greater than | +2 | Sensor Hinge
1. Ramp Rotor - Toggle Block Off - Turns off rotors if sensor detects obstacle
1. Empty
2. Green Signal - Toggle Block On
2. Green Signal - Toggle Block Off
3. Red Signal - Toggle Block Off
3. Red Signal - Toggle Block On
[Large Ramp]
4. Ramp Rotor Hinges - Toggle Block Off - Turns off Hinges if sensor detects obstacle
4. Empty


Event Block: Opened (Piston Bot Outer)
Event: Piston Position % | Equal or less than | 0% | Piston Bot | And Gate
[Large Ramp] Equal or greater than | 100% | Piston Top Outer | And Gate
1. Ramp Hydraulics - Toggle Block Off - Turns off pistons and hinges
1. Empty
2. Ramp Hinges - Hinge lock On/Off - Turns on hinge lock
2. Empty
3. Timer Block Close 1 - Toggle Block On - Cycle complete, ready to Close
3.


Timer Block Close 1
- Tab 1
1. Ramp Rotor - Toggle Block On
2. Ramp Rotor - Reverse
3. Green Signal - Toggle Block Off
4. Red Signal - Toggle Block On
5. [Large Ramp] Ramp Rotor Hinges - Toggle Block On
6. [Large Ramp] Ramp Rotor Hinges - Reverse
7. N/A
8. Event Block: Closing - Toggle Block On
9. Event Block: Sensor - Toggle Block Off
- Tab 2
1. Timer Block Close 1 - Toggle Block Off


Event Block: Closing (Rotor Left)
Event: Angle Changed | Equal or less than | +70 | Rotor Left
1. Timer Block Close 2 - Toggle Block On
1. Empty
2. Timer Block Close 2 - Trigger Now
2. Empty
3. Ramp Spotlights - Toggle Block Off
3. Empty


Timer Block Close 2
- Tab 1
1. Ramp Hydraulics - Toggle Block On
2. Ramp Hydraulics - Reverse
3. N/A
4. N/A
5. Ramp Hinges - Hinge lock On/Off - Turns Off hinge lock
6. N/A
7. N/A
8. Event Block: Closing - Toggle Block Off
9. Event Block: Closed - Toggle Block On
- Tab 2
1. Timer Block Close 2 - Toggle Block Off


Event Block: Closed Lock (Hinge Bot)
Event: Angle Changed | Equal or less than | -45 | Hinge Bot | And Gate
1. Ramp Hinges - Hinge lock On/Off - Turns on hinge lock
1. Empty
2. Ramp Rotor - Rotor lock On/Off - Turns on Rotor lock
2. Empty
3. Timer Block Open 1 - Toggle Block On - Cycle complete, ready to open
3. Empty
4. Mag Lock - Autolock On/Off - Turns on Autolock
4. Empty
5. Ramp Red signal - Toggle Block Off
5. Empty
[Large Ramp]
6. Ramp Rotor Hinges - Hinge lock On/Off - Turns on hinge lock
6. Empty