Butiksside
Scrap Mechanic
Alt Diskussioner Skærmbilleder Illustrationer Broadcasts Videoer Værksted Nyheder Guider Anmeldelser

Scrap Mechanic

Butiksside
Scrap Mechanic >  Værksted > The Red Builders værksted > Crashlander: Square One > Diskussioner
Crashlander: Square One
Beskrivelse Diskussioner272 Kommentarer1256 Ændringsbemærkninger
Nadeltrauma 21. jan. 2024 kl. 0:26
Alternator doesn´t work
No matter whether with a controller, gas engineer or water wheel, my alternator does not create batteries. It always stays at 0% and before anyone asks, yes, I professionally connect the alternator or heavy alternator to the bearings
< >
Viser 1-6 af 6 kommentarer
DC-GS 21. jan. 2024 kl. 3:00 
Do you spin the bearing fast enough?
How long did you wait for the progress to go up?
Have you build on the lift and welded it together?
Sidst redigeret af DC-GS; 21. jan. 2024 kl. 3:18
#1
mindmasher 23. jan. 2024 kl. 11:16 
i have 3 water wheels connected to a heavy duty alternator, and yea the alternator is hooked up to the bearing placed on it. it wont work and when you connect the bearing it it goes fast for a few seconds and works then doesn't.
#2
DC-GS 23. jan. 2024 kl. 11:31 
Havent used waterwheels myself. Sounds like the heavy alternator is too much for the water wheel. Have you tried the smaller alternator instead?
#3
mindmasher 23. jan. 2024 kl. 11:48 
no I haven't. ill try that and see how it does.
#4
mindmasher 26. jan. 2024 kl. 9:35 
yea it didn't work for the normal one ether. so ill just use a max controller on loop.
#5
Loeffel 27. jan. 2024 kl. 7:16 
The waterweels will produce batteries with the alternator, but it will use an eternity to produce batteries as the waterweel is too slow and too week.
#6
< >
Viser 1-6 af 6 kommentarer
Per side: 1530 50