Pagina del Negozio
Scrap Mechanic
Tutto Discussioni Screenshot Immagini Trasmissioni Video Workshop Notizie Guide Recensioni

Scrap Mechanic

Pagina del Negozio
Scrap Mechanic >  Workshop > Workshop di The Red Builder > Crashlander: Square One > Discussioni
Crashlander: Square One
Descrizione Discussioni273 Commenti1263 Note di rilascio
Nadeltrauma 21 gen 2024, ore 0:26
Alternator doesn´t work
No matter whether with a controller, gas engineer or water wheel, my alternator does not create batteries. It always stays at 0% and before anyone asks, yes, I professionally connect the alternator or heavy alternator to the bearings
< >
Visualizzazione di 1-6 commenti su 6
DC-GS 21 gen 2024, ore 3:00 
Do you spin the bearing fast enough?
How long did you wait for the progress to go up?
Have you build on the lift and welded it together?
Ultima modifica da DC-GS; 21 gen 2024, ore 3:18
#1
mindmasher 23 gen 2024, ore 11:16 
i have 3 water wheels connected to a heavy duty alternator, and yea the alternator is hooked up to the bearing placed on it. it wont work and when you connect the bearing it it goes fast for a few seconds and works then doesn't.
#2
DC-GS 23 gen 2024, ore 11:31 
Havent used waterwheels myself. Sounds like the heavy alternator is too much for the water wheel. Have you tried the smaller alternator instead?
#3
mindmasher 23 gen 2024, ore 11:48 
no I haven't. ill try that and see how it does.
#4
mindmasher 26 gen 2024, ore 9:35 
yea it didn't work for the normal one ether. so ill just use a max controller on loop.
#5
Loeffel 27 gen 2024, ore 7:16 
The waterweels will produce batteries with the alternator, but it will use an eternity to produce batteries as the waterweel is too slow and too week.
#6
< >
Visualizzazione di 1-6 commenti su 6
Per pagina: 1530 50