Stormworks: Build and Rescue

Stormworks: Build and Rescue

Not enough ratings
Regional Railways British Rail Class 158
   
Award
Favorite
Favorited
Unfavorite
File Size
Posted
Updated
4.180 MB
8 Aug, 2023 @ 1:50pm
8 Aug, 2023 @ 3:09pm
2 Change Notes ( view )

Subscribe to download
Regional Railways British Rail Class 158

Description
REQUIRES EITHER A CUSTOM MISSION OR MODDED WORKBENCH TO SPAWN.
Speed and comfort in a bite sized package!
The British Rail Class 158
Isn't she a beauty? A sleek and modern train to really spruce up the Regional Railways network! 90 Mile per hour running! Whisper quiet cabin! And even a handcart served meal service (Note: Think like how snacks are given out on a plane, with the flight attendants pushing a cart full of snacks and food) on such a short train! A shame about replacing the old locomotive hauled stock, but it really needed to happen. Those carriages were riddled with nasty chemicals and asbestos. And don't get me started on those old DMUs. Those were terrible!
But enough about the past, lets take a look at the 158, shall we?


The British Rail Class 158 is a 2 or 3 car Diesel Multiple Unit (DMU) meant for semi-fast and express services across the diesel ranges of Britain. Built in 1989 to 1992, these DMUs represented a massive leap forwards for Britain railways, being more efficient, cheaper to run, and more comfortable than older locomotive hauled sets and first generation DMUs, which dated back to the 1950s in some cases. The 158s were quieter than their older DMU brethren, and though they lacked the full dining car of Locomotive hauled sets, they did still have meal services.

In stormworks, this train features a full PID system, allowing you to set a service and have screens inside the cabin show your next destination. The 158 has multiple unit capability, allowing 2 or more trains to be coupled together to form 4 or 6 car formations. Or beyond. In addition, the train has enough range to get to the arctic (and possibly back!) with a top speed of 90 mph.
As for starting up the train:
  • Board the train by using the green key found near any door to release it.
  • Go to the A cab (forward cab when spawned from a workbench) and flip the MCB found below the drivers seat.
  • Go to your desired driving cab, Sit in the drivers seat, and turn on the Master Switch found below the "coupler Isolate" and "Decouple" switches.(inside the forward desk)
  • Press the "Engine start" Button and hold it until you hear the engine idle. You can test with the throttle to ensure the engine has started up properly.
  • Turn on the "P.D.I.S V2 System power" flip switch. (Look up and slightly right)
  • Select the reverser arrow in the direction of travel, reduce the brake to 0, and throttle up (The throttle is notched, press W 7 times to get max throttle.) Now you are moving!

For the PID (Passenger Information Display) V2 system, look up and to your right in the drivers seat. There you will see some buttons and 3 Keypads.
"Service number" is the route number. This can be anything you want so long as it isn't 0 or over 999
"Radio Frequency" does not matter for the PID system, its your radio.
"Station Number" dictates which station you are going to input into the system.
"Cycle" cycles between stations in the system in order. This tells the system what station you are at. (These are the numbers that are displayed.)
"Enter Station" Creates a new entry for the station that is currently in the "Station Number" keypad, unless its the same number as the previous entry.
"Delete selected station" deletes the currently displayed station.
For more info, see the guide to station guidesHere. PIDS system V2.2



Credits:
Base Paintkit, Roof detail, Carpet, and Bathroom courtesy of RMC.
11 Comments
Tonk 2 Oct, 2023 @ 3:56am 
done my name is cap.man aka. Командир российского танка Т-90А
Corporal Simmons  [author] 1 Oct, 2023 @ 10:57am 
Certainly. Send me a friend request and we can continue this conversation in discord.
Tonk 1 Oct, 2023 @ 3:32am 
Since i couldn't fix it i would to ask if i can Message you on Discord Simmons to show what my possible issues are i think in Discord i can explain better
Corporal Simmons  [author] 27 Aug, 2023 @ 10:21am 
My startup sequence might be a bit funky, you can check out the base paintkit for startup instructions here: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2814513222
RMC 27 Aug, 2023 @ 9:01am 
I have tried to find the issue you’re facing and can’t seem to recreate the issue you have stated. The only plausible explanation is user error. Sorry but there isn’t much we can do to help you.
Tonk 27 Aug, 2023 @ 1:45am 
Everything is On that has to be On.
Other Thing: Shouldn't every Light Turn on? I mean if i'am in the Driver seat and turn on the Light for the Passenger it's only on for the Part that i'am sitting in
Corporal Simmons  [author] 26 Aug, 2023 @ 12:48pm 
Is the:
DSD active
Engine started
Master Breaker on
Tonk 26 Aug, 2023 @ 5:30am 
I did but i still wasn't able to throttle Up
RMC 25 Aug, 2023 @ 11:55am 
Please turn off the master switch inside cab A, the master switch is what controls the entire train and any compatible units attached. By turning on the master switch inside cab B, you will control the train from there.
Tonk 25 Aug, 2023 @ 11:36am 
Nice Class 158, there is a Problem, whenever i start up the Train, only the A Cabin works, i can everything but the loco does not move when i sit in the B Cab