Cities: Skylines

Cities: Skylines

Steep Terrain Building
20 kommenttia
Halberd 15.7.2021 klo 20.44 
i want to break my kneecaps with a toy hammer and eat the shards
Ascendance 8.1.2016 klo 17.27 
please update it doesn't work with the current version this mod was so helpful :(
bast 8.12.2015 klo 1.30 
is it possible to toggle the mod (i.e. hotkey) while the game is running?
cavitycreep 7.7.2015 klo 18.59 
Compatible with 1.1.1c?
TyGently 31.5.2015 klo 8.06 
Fantastic, thank you.
hyperdrive_engage  [tekijä] 30.5.2015 klo 22.46 
@Tyler Gently I just added an exclusion for buildings placed on water or shoreline.
TyGently 30.5.2015 klo 15.23 
You should disable this on advanced wind turbines, it's leveling the riverbed.
Blackkatt 14.5.2015 klo 22.56 
This applies to road and train tracks too I notice. that's not always good imo.
hyperdrive_engage  [tekijä] 28.4.2015 klo 13.46 
@GordonDry should be fixed now
GordonDry 28.4.2015 klo 13.26 
Unfortunately also water pump assets will get flattened ground, so the pipes never reach the water beneath it...
hyperdrive_engage  [tekijä] 27.4.2015 klo 21.01 
@Euthanasea no, this isn't possible. unlike Road Anrchy, this mod works by modifying properties of each individual building, rather than by overriding default game functions.
hyperdrive_engage  [tekijä] 27.4.2015 klo 21.00 
@Euthanasea no, this isn't possible. unlike Road Anarchy, this mod works by modifying properties of each individual building, rather than by overriding default game functions.
Euthanasea 27.4.2015 klo 20.55 
Would it be possible to get a hotkey to enable/disable the effects of the mod?
GordonDry 26.4.2015 klo 23.58 
I will test it later.
hyperdrive_engage  [tekijä] 26.4.2015 klo 21.12 
@GordonDry I stand corrected, did not realize that some road/pedestrian pieces are stored as BuildingInfo, such as pillars. This should now be fixed.
hyperdrive_engage  [tekijä] 24.4.2015 klo 16.24 
This mod does not affect roads at all, so it seems unlikely that this is caused by this mod.

Full source code: http://pastebin.com/BHgqaWAS
GordonDry 24.4.2015 klo 16.10 
I found an issue - using both mods and setting an intersection asset with steep pedestrian bridge ramps creates "holes to hell" .
When I save, exit, turn off this mod and load, the holes are gone.
Also I tried to smoothen the area (Terraformer mod) on half of the intersection where the holes were as both mods were on.
After loading the save (after disabling this mod) there were tiny holes on that side of the intersection but I could smooth them to flat.
hyperdrive_engage  [tekijä] 24.4.2015 klo 16.01 
Should be compatible, that mod seems to do the same thing as Road Anarchy.

It only works for buildings, either of the other 2 road mods should allow intersections to be placed anywhere but I haven't tested this.
GordonDry 24.4.2015 klo 5.51 
I hope it is compatible to "[WIP] Steeper Slopes & Higher Bridges" https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=412920038
Does it only work for buildings or also for assets like intersections?
I could test it by myself but just to have asked here...