Tilaa ladataksesi
ISL - Ore Detector Trailer

A medium trailer with a large ore detector mounted (via rotor) on it, for increasing the prospecting range of small grid ground vehicles equipped with a tow hitch, forgoing the need for a dedicated vehicle such as the Vicuna Prospector.

There are hinges at the front and rear that function as tow hitches, allowing connections to either trucks or other trailers. As this is not designed as an autonomous vehicle, each trailer is controlled primarily through the use of labeled buttons, although an RC block is still present. Check the "Movement & Control" section for a list of the buttons and their functions.

The vehicles that are compatible with this trailer include:
1. ISL - Iktis RO-100a Light Truck
2. ISL - Iktis RO-130b Light Truck
3. ISL - Ratel RO-720 Excavator
4. ISL - Marten RO-520 Excavator
5. ISL - Marten MK2 RO-520 Excavator
6. ISL - Lakan RC-630a Medium Truck
7. ISL - Lakan RC-700b Medium Truck
8. ISL - Nurina RO-34 Forklift
9. ISL - Mara RO-54b Survival Truck
10. ISL - Mara RO-122a Light Cargo Truck
11. ISL - Lontra RO-72 Utility Truck
12. V.M.E Light Utility Vehicle
13. V.M.E ACR-6 Armoured Risk Control Vehicle
14. V.M.E Light-Duty Truck
15. V.M.E Brawler Tactical Armoured Patrol Vehicle
16. V.M.E ACR-8 Armoured Ground Combat Vehicle
17. V.M.E ACR-4 Armoured Combat Rover
18. [AGI] SV-64 Castor (Scouting Vehicle)
19. [AGI] LTV-73 Plutus (Light Tunneling Vehicle)

This trailer is still considered "printable" although the addition of a single hinge head block is required after printing, as well as the LG ore detector sub-grid, as seen in the screenshots.

The Ore Detector will have to be attached after printing, as projections to not extend to sub-grids. To do this, drop a LG advanced rotor head onto the SG rotor (top center of the trailer), then go into the control terminal, find the "ODT Rotor" and press the attach button. The rotor should orientate itself to 0 degrees, once it has done so, place the LG ore detector and weld it up (don't forget to increase its range to maximum).

Power:
1 Battery
3 Small Batteries

Movement & Control:
1 Remote Control
2 wheels - 3x3

The buttons and timer blocks found on this trailer, and their functions, are as follows:

1. Pack - Trigger TB Pack
2. Unpack - Trigger TB Unpack
3. Attach - Attach hinge head to rear mounted hinge base (tow hitch)
4. Detach - Detach hinge head to rear mounted hinge base (tow hitch)
5. TB Pack - Front Hinge Unlock, Piston Retract, Handbrake Off, Lights On, Antenna Off
6. TB Unpack - Front Hinge Lock, Piston Extend, Handbrake On, Lights Off, Antenna On

Cargo Space
2 Small Cargo Containers

Miscellaneous:
This trailer has an empty mass of 9837 kgs (including Ore detector sub-grid).

All ships, vehicles & trailers in this set have a rear mounted Merge block and can be printed using a welder wall with one (large grid) piston. However in this case the merge block is designed to be ground down after printing, all blocks that require removal are painted bright red.