Steam Workshop::Pte Jack's Model Uploads

Created by Pte Jack

I received a request to redo the Aperture Scout I posted a while ago. To make it so the pack was removable and that his hat was the colour of the original scout. So after some revamping I decided to go one step further and tried to make the head meet HWM s...

11:59:59 - The Spytech Clock Animated

Created by Pte Jack

This one was quick and simple to do, so I thought, "What the heck"!!! Includes: ptejack\props\clock\wall_clock_anim.mdl ...

1960s Batmobile - Atomic Batteries to Power, Turbines to Speed...

Created by Pte Jack

TO THE BATMOBILE!!!! Na-Na Na-na na-na nA-nA, Na-Na Na-na na-na nA-nA!! This is probably one of the best renditions of the 60's Batmobile I've seen to date. It was uploaded to Deviantart by CapLagRobin and is available in XNA format here https://caplagrobi...

All Class Paintable Dogtags

Created by Pte Jack

Someone asked for a set of dogtags that were flexible enough to use on almost any model... Well, try these out. And, YES they are paintable. The textures are in one sheet, but for those that are talented enough to edit, you should be abled to edit the plat...

A Delicate Tea Set - REVISED!!! Added Saucers, and a Basic Skin and is paintable.

Created by Pte Jack

Pinkies up, Boys. REVISED!!! Added Saucers, Rescaled the Tea Set, realigned the bones to the World!! A MAJOR overhaul! But for those that have already used the original in projects, no worries, the original is still here. You can blend the new into you pro...

All Hail the Queen Baby!!! (Version 2)

Created by Pte Jack

As promised!!! Here she is for your SFMing pleasure!!! 127 bones, 13 Flexes. Even the heel spikes have a bone. Yup, even the lips move so you can cover up that nasty smile. Sorry, could not do anything to move the shield over her head, I had to rob bones f...

Aperture Test Subject Scout

Created by Pte Jack

This was a GMod model worked on and uploaded to the GMod Workshop by Basil, The Freakin' Scout's a Spy and Snowflake Credit for the Original GMod and I believe TF2 model and skins as well goes to Aperture Test Subject Scout skin by drmeinhart Original Conc...

BB8 Droid (and it's Paintable too!!)

Created by Pte Jack

This is my adaptation of the BB8 Droid and completely modelled using Blender. It has 3 paintable skins, clean, dirty and camouflaged. GIMP was used to design the basic skins, then Substance Painter 2 was used to paint the model and then back to GIMP to add...

BioShock Infinite Songbird Version 3 - Revised with 4 Sizes, Folding and Unfolding Wings, Animated Idle, Walk and Wait Sequences

Created by Pte Joe

Well I guess this will expose one of my other UserIds to the world... Pte Jack Here!!! I was playing around with some XNALara files and wanted to see if I could get one into SFM before I started a tutorail on how to do it. This was the result. I had to del...

Blow Your Own Horn (or Trumpet) - Now in 2 Flavours, The Original (2 skins) and The Bellowing Bell (4 Skins)

Created by Pte Jack

Someone requested a trumpet with working tone valves. Well this one has flexing tone valve and the spital valves work as well. So, my trumpet model will now have 2 flavours, the original called trumpet.mdl and this one called trumpetbb.mdl (the bb stands f...

Boba Fett (Remake)

Created by Pte Jack

This is a remake of Lillwasa's Jango Fett model that was included in this pack https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=253481422 The model was textured very well however I had to do a major overhaul on this model as it was very poorly rigged...

British Pillar Box (Mailbox)

Created by Pte Jack

As requested by Warmcanofcoke... Model was designed by johnny83 and is available as a free download from TurboSquid in .max, .obj and .fbx format. I converted the .obj format to valve compilant format and added the "Post Office" bump and a single bone to m...

CatWoman Glasses for FemScout

Created by Pte Jack

Thought I'd give this a try and see what the results would be. No! the model is not broken or invisible. itl spawns turned off (Skin 0), so, to activate it, switch to Skin 1. 2 Bones, bip_head and prp_glasses. prp_glasses is at the bridge of the nose and u...

CS:GO Swat Van - enhanced

Created by Pte Jack

Someone had asked for an enhanced Swat Van and posted a picture of the one from CS:GO. So here we go. Here's a list of "some of" the Enhancements... Rear End 1) Split open the back end and made it a deployment ramp 2) added an inner box to the Van Body to ...

CS:GO Weapons Crate - Enhanced (You just need the key, Son)

Created by Pte Jack

Someone had asked for an enhanced Weapons crate or foot locker and posted a picture of the one from CS:GO. So here we go. Here's a list of "some of" the Enhancements... Opening lid with internal textures, lid latches rotate, handles can be rotated, padlock...

Charge of the Rubber Brigade

Created by Pte Jack

Got playing around in blender and thought "What the Heck!" and looked up some balloon animals pictures on the internet. The model does have bones but both front legs are assigned to one bone as are the rear legs. (I was going to use jiggles, but not quite ...

Crash Test Dummy (with Rack)

Created by Pte Jack

Someone had asked for a Crash Test Dummy a little while ago. Well, Here you go... This model has 3 skins, plain(0), bump mapped(1) and paintable(2). Not only do you get the Dummy in this download, but you also get the rack. The Rack has a Flex control that...

Cryo-Stasis Chamber

Created by Pte Jack

A little something I threw together... The Door(s) and guages have bones... Is cloakable and check out the skins... (I may update this with a cleaner skin later) Includes: ptejack\props\chamber\chamber_grunge.mdl ...

Down Under Duster - Paintable

Created by Pte Jack

Someone wanted the ability to paint the sleeve portion of Down Under Duster, well what if I gave you one that you could paint the vest, sleeves and accessories separately. I take no credit for this model or the textures it uses. They are dupes of the model...

English PhoneBox V.II (Not quite complete but enough to use)

Created by Pte Jack

As requested by Warmcanofcoke... Model was submitted to TF3DM.com by 3dregenerator in .obj format. There were no materials and it required a lot of rework to get it into SFM. It is not quite finished, but I know of some ppl who really require something lik...

Enhanced Balloonicorn v1.1

Created by EmperorFaiz.wav

Ladies and gentlemen, your beloved lovable adorable floating plushie is now a living majestic creature and ready to spread some love with extra unusual sparkles. -Now with bones. You can pose her around like one of your French girls. -More skins with emoti...

Enhanced Cargo Plane - Materials revises

Created by Pte Jack

Spinable Props and wheels, retractable landing gear. Added phong and disabled alpha/detailblend Includes: ptejack\planes\cargo_enhanced.mdl ...

Filamental Headshot

Created by Pte Jack

Light out, Nobody Home Includes: workshop\player\items\pyro\robo_pyro_figment_filament\robo_pyro_broken.mdl ...

Gentle Manne's Service Medal - REVISED AGAIN!!!

Created by Pte Jack

Now you can wear your Gentle Manne's Service Medal with Pride!! Revised Again!!! (This is the medal used on the Game Play Model, Much better that the thing I found to do revision 1.) Because so many of you have subbed the original, I'm going to leave it as...

HTTYD's - Astrid

Created by Pte Jack

This model was a OBJ type model and was found on the Model Resource website here... http://www.models-resource.com/pc_computer/schoolofdragons/ I would like to thank Jessie (jess.cass42p) for providing it to the website and giving me permission to bring it...

HTTYD's Hiccup

Created by Pte Jack

This model was a OBJ type model and was found on the Model Resource website here... http://www.models-resource.com/pc_computer/schoolofdragons/ I would like to thank Jessie (jess.cass42p) for providing it to the website and giving me permission to bring it...

Halo Longsword (Halo Combat Evolved Model)

Created by Pte Jack

Why this model?? Because I saw a request and thought, why not... I found this model on the http://www.models-resource.com website Uploaded by Shadowth117 who requested that credit go to TheGhost. This model is HUGE. I rescaled it for use with the CS size m...

Hatty Hattington - (Revised Spy)

Created by Pte Jack

As requested, Hatty Is a Spy!!! This is a revised Spy Model with importable Spy Sequences. (warning, hands will disappear into the head in some sequences and will have to be manually adjusted if used!) Model has its own primary textures but uses some of th...

HipHop Harmony

Created by Pte Jack

These are made for the scout, however, I've added bones in the ear pieces so they can be fitted to the different classes. If you lock the model (root transfer and bip_head) to the model and zero, the ear phones will collaspe inward because there is nothing...

Hot Dawg!! Get Your Hot Dawg!!

Created by Pte Jack

Every soldier's favorite treat. Everything here is a bodygroup that can be turned on or off, so you can have your bun, you can have your weiner, you can have it with Ketchup, you can have it with mustard, or both. Sorry no relish or onions, there's a war o...

Hulk's Lil' Cousin, Barry

Created by Pte Jack

Yeah he's Big, Yeah he's Green, but this dude is WAY more chill than is older cousin and he knows how to Bust a Move or two. This model was created using the Steam version Of FUSE (Ver1.3), the Mixamo AutoRigger and a day spent putting him together using B...

JU87 Stuka Dive Bomber (my interpretation)

Created by Pte Jack

Ok folks, this one is all me... Built from scratch in Blender (including the rear gun). Compiled using Blender Source Tools direct from Blender, Textured using Substance Painter Final model came in at 300,635 Tris (so yes you can get big models out of Blen...

Jango Fett (Remake)

Created by Pte Jack

This is a remake of Lillwasa's Jango Fett model that was included in this pack https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=253481422 The model now sports 2 Westar 34 blast pistols that I created and the fake ones that were on the model removed. ...

Jumanji Board Game

Created by Pte Jack

Roll the dice if you dare! Updated: Now has individual hit boxes on Player Pieces, Dice and Compartment Doors to avoid Clip Outs when they are pulled away from the board or doors opened. Includes: ptejack\props\games\jumanji\jumanji.mdl ...

Kiseru Pipe

Created by Pte Jack

Just because I though it would be kewl. The Kiseru (煙管) is a Japanese smoking pipe traditionally used for smoking a small serving (about 25 mg) of kizami, a finely shredded tobacco product resembling hair. Model has 3 bones, the prp_pipe is the main bone a...

Le chapeau d'étain

Created by Pte Jack

Every soldier, no matter what trade, must have a tin pot to cover their head while in the trenches or just relaxing in the biv while on the front line. Taking a very quick glance at the Spy's Official Misc items on the TF2 Wiki, I did not see one so I thou...

Lil' Sharky - Drone, Hand Held Transmitter and Monitor

Created by Pte Jack

Someone had asked for a drone, complete with hand held transmitter and a POV (RT_camera) Monitor... Well, Here you go. Nothing fancy and just a quick throw together, but it should get the job done. Models are separate and have to be loaded individually, th...

Low Poly Posable Wolf

Created by Pte Jack

This is a simple, low poly model I found on the web. Not sure who the author was, no name was given, but kudos to whoever made it. Fixed up some holes, tweaked the seleton a bit, but it's really low poly so it may do for those not too close type vids. Incl...

Medic's Stand Alone Back Pack

Created by Pte Jack

This is the BackPack that spawns with the medic. There were requests for it to be a stand alone model. So, now it is. Red/Blu and invulnerable skins included. Model uses the Player Medic Spine02 and prp_backpack bones, so it will lock to the medic without ...

Motorcycle for SFM (A quick throw together)

Created by Pte Jack

As requested by Weezer the Great... a quick and dirty Bike I found on the web, revamped and boned using Blender with quick and dirty textures. This was a quick throw together as it was required for a 2013 Saxxy clip. This is a high poly count model and req...

My Pramm, Mann

Created by Pte Jack

Rubber Baby Buggy Bumper Yppers... a Baby Buggy Includes: ptejack\props\carriage\carriage.mdl ...

My Precious (The One Ring aka Isildur's Bane)

Created by Pte Jack

Three Rings for the Elven-kings under the sky, Seven for the Dwarf-lords in their halls of stone, Nine for Mortal Men doomed to die, One for the Dark Lord on his dark throne In the Land of Mordor where the Shadows lie. One Ring to rule them all, One Ring t...

myPods

Created by Pte Jack

Groove to the music with these Blue Tooth Beauties... Attaches to the head and neck bones (default is Sniper of course) but also has ear_L and ear_R bones so you can plug them into almost any model and make adjustments Has 4 bodygroups. Both Left and Right...

Nefnoj's Bloodthirst Cursed

Created by Pte Jack

Due to popular demand, this is a remake of Nefnoj's Bloodthirst Cursed. The original model was missing textures and the eyeballs clipped through the eyelids when they were closed. I've reboned the model so it conforms closer to the HWM layout, fixed the te...

Old Time Lantern

Created by Pte Jack

I can't take credit for the lantern, it's the one from Pirates, Vikings and KnightsII, however, I remodeled the pattern in the glass so that is is an actual mesh so that it will cast a shadow and block light. I also added a candle that is a bodygroup membe...

One REALLY Broken Glass

Created by Pte Jack

Just Because!!! IF OFFERED TO REPLACE MATERIALS, ALWAYS CLICK YES TO ALL or the model may not work. This model will spawn in a posed position as if being held by the Sniper in his Ref Position. It has 2 bones A weapon Bone, which will help you zero the gla...

Paintable Hula-Hoop

Created by Pte Jack

Seeing as how Totally Useless Models (TUMs) seem to do well, well here's another one. This model has 3 bones other than the root transform. The bip_pelvis allows you to attach the model to a character model The bip_hoop bone is what allows you to offset th...

Playable Midi Keyboard

Created by Pte Jack

All keys, knobs, and pitch wheels are moveable via bones. The Key Bones are named after the note they represent (ie, C thru A White and the Blacks are named as the sharp and flat notes.) There are 49 keys here. The buttons and velocity control are on flex ...

Please, I Want Some Morse, Mann

Created by Pte Jack

Yup, an old fashion Morse Key Pad... Send messages to your friends... Oh, and the message in the video is an actual morse coded message and a hint to what my next guide will be on... Includes: ptejack\props\telegraph\telegraph2.mdl ...

Pokemon Trainer - Call him what you want!!! (There!)

Created by Pte Jack

This is a collection of the 4 sizes of the Pokemon Trainer seen in the picture. Only one skin available right now. The balls in their hands will detach and are useable. Rate them up if you like them. Post recommendations for changes here. Includes: Pokemon...

Poker Table

Created by Pte Jack

Someone had asked for a round multi-use/poker table. Well, Here you go. Nothing fancy and just a quick throw together, but it should get the job done. This is a static prop type model with the root transform and the static_prop bone on the floor. The model...

Q2Q'sLvl3 - Star Trek 3D Chess Board

Created by Pte Jack

Fully Functional 3 Dimensional Chess Board For the Trekkies! Note: I may be updating this model so the Pieces on the attack boards are parented to the main Base bone instead of the attack platforms. Add the following to the sfm_defaultanimationgroups.txt f...

RT_Camera Panels

Created by Pte Jack

There are 6 Rt_camera panels Body Groups in this model, so you don't have to go looking for separate models. They can be turn off in scene by chosing the None Body Group. 1) Circle 2) Horizontal Oval 3) Vertical Oval 4) Horizontal 16x9 Rectangle 5) Vertica...

Really Kewl Mann

Created by Pte Jack

I actually modelled this one myself... YEA!!!! Created because of an interesting request. Model has 4 bones, The bip_base is the main bone, use this one if you plan to scale it The bip_neck is the up/down pivot point and the bip_pivot is the left/right piv...

Red Bread vs Blu Corn Van - UPDATED!!!

Created by Pte Jack

UPDATED: Added Monitor incoming call blinking light skin to each of the four main skins and change the the monitor button light to on when a screen other than off is used. The model now has 20 skins. (First number is the Red Skin, second is the blue skin -...

Repaired Monoculus - (aka Halloween_DemoEye)

Created by Pte Jack

Someone had asked for this to be fixed so it wasn't translucent when loaded. Well it took a bit of work, and just in time for Halloween, here you go. This still uses the original textures and the basic fix was to go in and add a $mostlyopaque command to th...

Representation of a Droideka

Created by Pte Jack

EDIT NOTE: I've added a required item to this model. For some reason when it was uploaded a detail texture for the deployed shields did not go up with the model. In the index on the right, you'll find a link to the texture fix marked as a required item. If...

Smile - Take your Picture???

Created by Pte Jack

This one is my own... Scratch built and thrown together in Blender. There are 3 flexes, one for each of the curtains and one for the seat. Textures need somemore work and I plan to make it paintable, and I want to put an actual developed picture slot on th...

Star Wars Enhanced R2-D2 Astromech Droid

Created by Dakota

Every ones favorite little Astromech from a galaxy far far away has arrived to Source Filmmaker and just in time for the Force Awakens! Surviving events from The Phantom Menace all the way to The Force Awakens R2-D2 is one of the most iconic and lovable ch...

Supermarine Spitfire

Created by Pte Jack

Well, here it is finally. This was an OBJ model I found on the TF3DM website uploaded by 3DRegenerator. I've boned all the flying controls (ailerons, flaps, rudder, and elevator), the main landing gear, propeller and canopy. I've also added Flex controls t...

TaKO Power

Created by Pte Jack

Having a bit of fun with a request I saw. This is 100% my own IP. Created from scratch. Has a root transform and staticprop bone. Includes: ptejack\props\food\taco\tako.mdl ...

Teleport Complete - Ralph is in the House (Now with Moveable Eyes!!!)

Created by Pte Jack

Adding a Rig: Unfortunately this was one of my first models and as such, does not accept the standatrd rig_biped_simple. HOWEVER, if you subscribe to the Workshop Auto-Rig Script created by OMG There's a Bear in My Oatmeal, you can create one really quickl...

Terminal Chair - Enhanced

Created by Pte Jack

As Requested, The Spytech Terminal Chair enhanced with flex sliders to raise and lower the hydraulic cylinder, a pivot bone to allow the chair to swivel and rotate and posable casters and wheels (I'll let you figure those bones out, their names are actuall...

Teufort Knight Repaired for All Classes

Created by Pte Jack

This model is available if you extract the files from the TF2 VPK Cache Files however if you try to use it, it is broken. (The author did not use $mostlyopaque into the QC so the model becomes semi-transparent in SFM). I have repaired all classes and you o...

The All_Class - DEAD OF NIGHT - Enhanced

Created by Pte Jack

I really hate the way these community items don't perform in SFM like they're suppose to in game. I received a request to fix the All_Class Dead of Night. On first quick inspection I actually thought that the extracted TF2 Game item worked as it was suppos...

The Bearded Bombardier - Enhanced - aka The Demo_BeardPipe

Created by Pte Jack

Ok folks, I've had quite a few requests to fix the materials on this model to make it paintable. After examining the materials and the actual model I found the only way to fix it was to redo the entire model. So, while I was at it, I enhanced it. Changes i...

The Chestburster - Because You've Waited Long Enough

Created by Pte Jack

70+ bones in this model (66 of them being the tail.) I've also added a normal map to bump it up a bit. Has basic facial and jaw flexes and the tongue extudes with opening and closing jaws. The model also has a basic slither sequence. Credit for this model ...

The De-Terminator

Created by Pte Jack

If you find that there are weird coloured checkerboards on the model when brought into SFM, it may be because I employ the enhanced TF2 Cubemap gold and sheen textures in the vmt. Go to this link and subscribe to the cubemaps and follow the instruction in ...

The Dr Dapper's Topper - Revised Bones - Locks Easier

Created by Pte Jack

Revised 31 Oct 2018 I've added the bip_head bone to fix locking and have changed the way the model spawns into SFM. Use the prp_helmet bone to move the hat around. Model should now zero after locking without problems. After all the public outcry for a pain...

The Fidget Widget - Another Totally Useless Model

Created by Pte Jack

Well, I was challenged to create this, so here it is. Another Totally Useless model brought to you by your's truly. Have fun with it... Comments containing foul language will be deleted Includes: fidget_spinner\fidget_spinner.mdl ...

The Fighter Ace Joy Ride

Created by Pte Jack

This was an OBJ file of an Air Pedal Kar created by a modeller going by the handle Birdman. I found it on sharecg.com (http://www.sharecg.com/v/58529/related/5/3D-Model/Pedal-Plane) and thought I'd have some fun with it. I sent Birdman an email requesting ...

The Glass Dome

Created by Pte Jack

Preserve your favourite item in this fancy glass dome. Includes: props\glassdome.mdl ...

The Hallowene Prop Fridge - Enhanced...

Created by Pte Jack

Top and bottom doors open, added interior to the fridge so no out cropping, Fixed materials, added 3 removable racks... Fridge is BYOB, so stuff it up with your favourite beverage... Includes: ptejack\props\fridge\pj_fridge.mdl https://steamhost.cn/steamcommunity_com/sh...

The LONG Table

Created by Pte Jack

Another simple Static prop, this one based off the TF\Bar_Table prop... The Tablecloth is a body group that can be turn on or off and has 3 simple skins as seen in the picture. This is a stand-a-lone model meaning table and the table cloth materials belong...

The Missing Teufort Turtleneck for Scout and Engineer - (The Scout model only Works on the "Player" Model)

Created by Pte Jack

Tis the season to dawn those TyrtleNecks--- Yes, I misspelt Turtlenecks - ON PURPOSE!!! This is a fix to the Garry's Mod Workshop Item and the missing (removed) from the Game cache file TeuFort Turtleneck The Scout will only work on the "Player" Scout due ...

The Nexus 7 Tablet

Created by Pte Jack

This was a neat and fun one to do, just a static prop from scratch... Found a neat screen, so there are 2 screens, off and on. This is a representations of a real world item, trade marks, branding, logos and titles used here are owned by their respective c...

The Nyan Cat - Update - Animated Sprite Card Added

Created by Pte Jack

Why did I do this??? Someone had asked for this to be in the workshop. So, here you go. If you get a prompt to replace materials, respond with a Yes To All or the model will not work. The rainbow trail is a body group that can be turned on or off and has b...

The Peace Pipe

Created by Pte Jack

Yet another addition to the Totally Useless Model Collection - A Wooden Flute Why...??? Because someone asked nicely for one! Model has 4 bones. bip_head (based on the position and rotation of the Scout head) for locking to a models head, bip mouth is the ...

The PGSB (aka Personal GreenScreen Bubble)

Created by Pte Jack

We've all been there, animating away and find that perfect pose that just might fit another poster we've done but no way to cut it out of the shot we've got going without changing maps addng green screens, etc. Well Let me introduce the PGSB. With this bub...

The Portable Objective Get Out Device (aka The POGO Stick)

Created by Pte Jack

It is only fitting the the Sniper show off this extraction device. Light, portable and a quick way out of a tricky situation. This is another addition to my TUM (Totally Useless Models) Series, like the unicycle, hula-hoop and other models I've posted, you...

The RotorToter

Created by Pte Jack

Still waiting for my laptop to come back from repair, so I thought I'd throw another tidbit out there for you to play with. 2 skins, a VERY simple cockpit, a stick, rotatable wheels and rotoes. Lock your characters bip_pelvis and root transform and zero it...

The Say WHAT???

Created by Pte Jack

Speak up, I couldn't hear ya!!!! Yes folks, it is a Bull Horn or Loud Hailer, or whatever you want to call it... I modelled this one from scratch, so feel free to use it for your saxys if you wish... The model has a bip_hand_R bone, and was outfitted so it...

The Sniper's Cleaner's Carbine (aka Pro_SMG) Enhanced

Created by Pte Jack

Thought I'd give redoing a weapon a go. So, Here's the Sniper's Pro Smg complete with usable Bolt and bolt stud, Safety catch, usable trigger, removable clip and folding stock. Model also has a muzzle flash attachment bone and an animated firing sequence (...

The Spy's Pocket Watch - AKA The Dead Ringer (V-wpn arms - Removed)

Created by Pte Jack

Ok folks, here it is. This is the original Spy's posable v - weapon pocket watch. I've removed the arms and made it it's own model. It does however still use the original TF \c_pocket_watch material so that means it is cloakable. The face plate is hinged s...

The SwagPutter

Created by Pte Jack

Stand by for another update. I just can do this... I can't have a plane without landing gear. I'll be adding version 2 to this model when I have it completed. It will have landing gear with 4 animations, Idle with wheels down, in flight (gear up), gear ret...

The Ubuntu Circle of Friends Button

Created by Pte Jack

This was a neat and fun one to do, just a static prop from scratch... 2 skins and rotation animations included... Includes: ptejack\props\ub_logo\ub_logo.mdl ...

Transavia PL-12 Airtruk

Created by Pte Jack

Spinnable Prop, movable control surfaces and spinnable wheels Back door does open.. Updated to include my skin rendition of Jebediah's Plane (From Thunderdome) This was a 3DS model I found on the web at http://artist-3d.com/free_3d_models/dnm/model_disp.ph...

Tux - The Linux Mascot (Not a Prop only)

Created by Pte Jack

Seeing that the prop was't enough for some people, I decided to make my own and give it some life... Ths model is low poly and the materials will block out if twisted too much. Also, the eyes are painted on and do not blink. The model is actually the same ...

Tux - The Linux Mascot (Prop only)

Created by Pte Jack

This was actually a .stl model, a format used for 3D Printing programs. The model was uploaded to http://repables.com/r/227/ by Gerrit Coetzee who credits Oliver Baker for its creation. Unforunately because of the nature of the model it was already posed a...

TW2 Boss Tank - All versions with Bones

Created by Pte Jack

The TW2 Bot Boss Tank is broken to SFM, they are invisible. I've repaired the all Boned versions of the tanks for use in SFM. These models have all the bone, however I have not had time to fix all the animations and the jiggle bones yet. The Movement and D...

TW2_Boss_Tank_Static - Fixed to work in SFM

Created by Pte Jack

The TW2 Bot Boss Tank is broke to SFM. I've repaired the Static model for use in SFM. This is the Static Model, a root Transform and a Stat_prop Bone ONLY. No animations. I am investigating the player model to see if I can repair it but it may take a few w...

Unicycle

Created by Pte Jack

Another request filled There are 3 bones in the wheel hub, the Main bone (consider this the pelvis or the bone that drives the unicycle. It would also be the bone you would set as a scale bone if you were to scale the unicycle) the Frame bone (this control...

Watering Can (Updated - now 2 different models)

Created by Pte Jack

Spring has sprung... Water up them flowers! Yes, it's paintable!!! I've had quite a few requests to make the spout removeable, to make the can spawn red and on the have it spawn on the floor instead of at waist. So to fill both orders I've created a 2nd mo...

WIii Trainer

Created by Pte Jack

This is a converted Garry's Mod model requested via the Discussion Group because it would not display in SFM. The Gary's Mod model was posted to the Garry's Mod Workshop by 300FusionFall (Check out his work) Includes: wii_trainer\wii_trainer.mdl ...

Xeno - FaceHugger (With Extractable Tube)

Created by Pte Jack

Found a OBJ unrigged Facehugger on the Internet, Rescaled it, added Bones (over 100 bones - 67 in the tail alone), gave it a bumpmap and managed to add a flex controller for the Tube. Enjoy!! Pte Jack Includes: FaceHugger\facehugger.mdl ...

The Mann CO. Vista CHARRRRRRR-JIT Kard

Created by Pte Jack

Model will have 3 bones, the root transform, one in the bottom left corner (bip_main) and one in the center (bip_card) for your posing (or throwing) pleasure. One Card, 18 skins. No soldier should be without an unlimited credit card... Includes: ptejack\pl...

Yup - It's a Tuba

Created by Pte Jack

It has 2 bones and the bip_pelvis is rigged to the Sniper's pelvis bone (I had to pick one) for zeroing and has a bip_main bone at the base of the pipe into the main bowl that can be used for positioning. It also has 5 flexes, one to extend the mouth piece...

Zathura

Created by Pte Jack

This was a fun model to make. The Key, and game box are body groups that can be turned on or off. The game pieces have bones so you can move them around the board. The Black Hole has 5 bones so you can spin it, lift it off the board and open it when you wi...

BB9e Droid

Created by Pte Jack

My adaption of BB9e. Single Skin, not paintable. Use the Bip_Main and the Bip_Head bones to animate. Includes: ptejack\robots\BB9e\bb9e.mdl ...

D-O Droid

Created by Pte Jack

My adaption of D-O. Yes it's D-Oh, not D-0 (Zero) I looked it up on the Star Wars Wiki.) Single Skin, not paintable. Use the Bip_Main is on the floor for moving, leaning, etc, Bip_wheel spins the wheel, Bip_arm rotated the head arm, bip Headbox pivots the ...

The Old 2747 (aka Anastasia Engine)

Created by Pte Jack

The Engine Featured in Anastasia. Model has 32 Bones and 8 animations. Includes: ptejack\vehicles\trains\anastasia\anastasia_engine.mdl ...

Coal Car for the Anastasia Engine (aka the Tender)

Created by Pte Jack

The this is the Coal Car for the Engine Featured in Anastasia. Model has 13 Bones for your animating pleasure. If you've downloaded the engine this model may popup the replace materials menu. Click Yes To All each time it appears. (Which is fine because it...

Freight Car (for the Anastasia Engine)

Created by Pte Jack

The this is the Freightl Car for the Engine Featured in Anastasia. Model has 24 Bones for your animating pleasure. UPDATED: Repaired 2 Reversed Normals and sealed the windows to repair a couple of holes on the inside of the car. Includes: ptejack\vehicles\...